[vox-tech] Re: Problem - PS/2 port still live after shutdown

[D & E Radel]

> Date: Wed, 26 Feb 2003 10:46:33 -0800
> To: vox-tech@lists.lugod.org
> Subject: Re: [vox-tech] Problem - PS/2 port still live after shutdown
> From: Henry House <hajhouse@houseag.com>
> Reply-To: vox-tech@lists.lugod.org


> On Wed, Feb 26, 2003 at 03:40:49PM +1300, D & E Radel wrote:
> [...]
>> When Linux shutsdown with halt -p, my pc will turn off,=20
>>  but Linux won't switch off the power to my PS/2 port. It is=20
>>  turned on when X starts, but when X shuts down, or the PC=20
>>  is shut down, the port remains on - and my Optical Mouse=20
>>  stays on. Light remains glowing, etc.
> [...]

> Hard to say what the problem is without more information. Would you please
> post the output of the 'dmesg' command?

Ok thanks.  Here it is:

Linux version 2.4.20 (root@debian) (gcc version 3.2.3 20030210 (Debian
prerelease)) #5 Sun Feb 23 16:19:08 NZDT 2003
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
 BIOS-e820: 000000000fff0000 - 000000000fff8000 (ACPI data)
 BIOS-e820: 000000000fff8000 - 0000000010000000 (ACPI NVS)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
255MB LOWMEM available.
On node 0 totalpages: 65520
zone(0): 4096 pages.
zone(1): 61424 pages.
zone(2): 0 pages.
Kernel command line: auto BOOT_IMAGE=Linux ro root=305
Initializing CPU#0
Detected 1533.427 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 3060.53 BogoMIPS
Memory: 256676k/262080k available (1394k kernel code, 5016k reserved, 317k data,
260k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 0383f9ff c1cbf9ff 00000000 00000000
CPU:             Common caps: 0383f9ff c1cbf9ff 00000000 00000000
CPU: AMD Athlon(tm) XP 1800+ stepping 02
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router default [1106/3074] at 00:11.0
PCI: Hardcoded IRQ 14 for device 00:11.1
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
udf: registering filesystem
ACPI: Core Subsystem version [20011018]
ACPI: Subsystem enabled
Power Resource: found
Power Resource: found
Power Resource: found
Power Resource: found
ACPI: System firmware supports S0 S1 S4 S5
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI
enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
lp0: using parport0 (polling).
gameport0: Emu10k1 Gameport at 0xec00 size 8 speed 1217 kHz
input0: Microsoft SideWinder GamePad on gameport0.0 [3-bit id 75 data 5]
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 89
PCI: Hardcoded IRQ 14 for device 00:11.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt8233 (rev 00) IDE UDMA100 controller on pci00:11.1
    ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA
hda: WDC WD1200JB-00CRA1, ATA DISK drive
hdc: 12X8X32, ATAPI CD/DVD-ROM drive
hdd: JLMS DVD-ROM LTD163, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
blk: queue c0316f24, I/O limit 4095Mb (mask 0xffffffff)
hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=14593/255/63, UDMA(100)
hdc: ATAPI 32X CD-ROM CD-R/RW drive, 2048kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
hdd: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
Partition check:
 hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 >
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 203M
agpgart: unsupported bridge
agpgart: no supported devices found.
Creative EMU10K1 PCI Audio Driver, version 0.20, 21:28:56 Feb 22 2003
emu10k1: EMU10K1 rev 6 model 0x8027 found, IO at 0xe800-0xe81f, IRQ 11
ac97_codec: AC97 Audio codec, id: f"v9(SigmaTel STAC9721/23)
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 260k freed
Adding Swap: 514040k swap-space (priority -1)
ptserial.o init.  country_code = 0
AC97 modem device found: devnum = 80008E00, devid = 1106/3068
irq = 5, iobase_0 = E000, iobase_1 =    0
Serial driver version 4.27.215 (MR) (09-14-2001) with MANY_PORTS SHARE_IRQ
SERIAL_PCI enabled
ttyS15 at 0xe000 (irq = 5) is a 16C950/954
assign pctel_interrupt
Trying to free nonexistent resource <0000e000-0000e007>
freeing IRQ(5)
assign pctel_interrupt
freeing IRQ(5)