[vox-tech] failed to build a computer

[Hai Yi]

Hello all:

I am in the process of building a new desktop, and ran into some serious
problems. I've been struggling with them for the past two days w/o too much
success.

Please kindly bear with me. These are my desktop's specs:

Case: Silverstone FT02B
PSU: CORSAIR CMPSU-650TX 650W
Mobo:GA-X58A-UD3R
CPU: i7-950
Video Card: Radeon HD 5870
Memory:GSkill 4G * 2 DDR3 1600
SSD: Kingston 128G

I also use a old HDD (250G) for now.

The problem is, after I wired up all internal wires and powered up the
system, the system kept resetting, and there is no video signals. If I
pressed the "cle cmos" button (there is one on the ft02B case, so I guess I
don't have to jump) during this process, the reseting stops, but still no
video signals. Next time I power up, the above happens again.

both atx_12v_2x and atx slots were hooked up with the PSU; two rams were on
bank 1 &2; power/reset sw and others were rightly put in the F_PANEL.

two PCI-E cables from PSU were hooked up with the video card to feed power.

It seems to me that I've exhausted all avenues I can think of to tackle the
problem, well, before I came here. :-)

Can anyone give me a hand here?

Thanks a lot!
HAi
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.lugod.org/pipermail/vox-tech/attachments/20110121/27cab819/attachment.html