Hello all:<br><br>I am in the process of building a new desktop, and ran into some serious problems. I've been struggling with them for the past two days w/o too much success.<br><br>Please kindly bear with me. These are my desktop's specs:<br>
<br>Case: Silverstone FT02B<br>PSU: CORSAIR CMPSU-650TX 650W <br>Mobo:GA-X58A-UD3R <br>CPU: i7-950 <br>Video Card: Radeon HD 5870 <br>Memory:GSkill 4G * 2 DDR3 1600 <br>SSD: Kingston 128G<br><br>I also use a old HDD (250G) for now.<br>
<br>The problem is, after I wired up all internal wires and powered up the system, the system kept resetting, and there is no video signals. If I pressed the "cle cmos" button (there is one on the ft02B case, so I guess I don't have to jump) during this process, the reseting stops, but still no video signals. Next time I power up, the above happens again.<br>
<br>both atx_12v_2x and atx slots were hooked up with the PSU; two rams were on bank 1 &2; power/reset sw and others were rightly put in the F_PANEL. <br><br>two PCI-E cables from PSU were hooked up with the video card to feed power.<br>
<br>It seems to me that I've exhausted all avenues I can think of to tackle the problem, well, before I came here. :-)<br><br>Can anyone give me a hand here?<br><br>Thanks a lot!<br>HAi<br><br><br><br>