[vox-tech] Hard drive dying?
Bill Kendrick
nbs at sonic.net
Tue Feb 24 14:46:29 PST 2009
On Sun, Feb 22, 2009 at 07:58:54PM -0800, Alex Mandel wrote:
> sudo smartctl -H /dev/sda
Gives me:
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
Please note the following marginal Attributes:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
190 Airflow_Temperature_Cel 0x0022 058 041 045 Old_age Always In_the_past 42 (Lifetime Min/Max 38/49)
240 Head_Flying_Hours 0x0000 000 000 000 Old_age Offline FAILING_NOW 179710021603702
241 Unknown_Attribute 0x0000 000 000 000 Old_age Offline FAILING_NOW 2384165937
242 Unknown_Attribute 0x0000 000 000 000 Old_age Offline FAILING_NOW 30165814
So I'm getting "PASSED", plus "FAILING_NOW"...?
> Gives you the basic yes/no
>
> sudo smartctl -a /dev/sda
Attached as an attachment... Looks like a bunch of
"Pre-fail" and "Old-age" reports...?
-bill!
-------------- next part --------------
smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: Seagate Momentus 7200.2
Device Model: ST9120823ASG
Serial Number: 5NJ11W2Z
Firmware Version: 3.ADD
User Capacity: 120,034,123,776 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Tue Feb 24 14:45:52 2009 PST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 426) seconds.
Offline data collection
capabilities: (0x53) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 111) minutes.
SCT capabilities: (0x0035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 253 006 Pre-fail Always - 0
3 Spin_Up_Time 0x0003 099 098 085 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 485
5 Reallocated_Sector_Ct 0x0033 098 098 036 Pre-fail Always - 111
7 Seek_Error_Rate 0x000f 072 060 030 Pre-fail Always - 17241171744
9 Power_On_Hours 0x0032 095 095 000 Old_age Always - 4449
10 Spin_Retry_Count 0x0013 100 100 034 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 495
187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 245
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 058 041 045 Old_age Always In_the_past 42 (Lifetime Min/Max 38/49)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 1
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 400
193 Load_Cycle_Count 0x0022 001 001 000 Old_age Always - 464085
194 Temperature_Celsius 0x001a 042 059 000 Old_age Always - 42 (0 17 0 0)
195 Hardware_ECC_Recovered 0x0012 065 060 000 Old_age Always - 243810737
197 Current_Pending_Sector 0x0010 100 100 000 Old_age Offline - 9
198 Offline_Uncorrectable 0x003e 100 100 000 Old_age Always - 9
199 UDMA_CRC_Error_Count 0x0000 200 200 000 Old_age Offline - 0
200 Multi_Zone_Error_Rate 0x0032 100 253 000 Old_age Always - 0
202 TA_Increase_Count 0x0000 100 253 000 Old_age Offline - 0
240 Head_Flying_Hours 0x0000 000 000 000 Old_age Offline FAILING_NOW 247518965272950
241 Unknown_Attribute 0x0000 000 000 000 Old_age Offline FAILING_NOW 2384167521
242 Unknown_Attribute 0x0000 000 000 000 Old_age Offline FAILING_NOW 30185294
254 Unknown_Attribute 0x0000 001 001 000 Old_age Offline - 167
SMART Error Log Version: 1
ATA Error Count: 245 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 245 occurred at disk power-on lifetime: 4448 hours (185 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 fa e5 30 e9 Error: UNC at LBA = 0x0930e5fa = 154199546
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 f6 e5 30 e9 00 08:29:12.864 READ DMA
27 00 00 00 00 00 e0 00 08:29:18.513 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 08:29:18.513 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 08:29:18.512 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 08:29:18.512 READ NATIVE MAX ADDRESS EXT
Error 244 occurred at disk power-on lifetime: 4448 hours (185 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 fa e5 30 e9 Error: UNC at LBA = 0x0930e5fa = 154199546
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 f6 e5 30 e9 00 08:29:12.864 READ DMA
27 00 00 00 00 00 e0 00 08:29:12.863 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 08:29:12.863 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 08:29:12.862 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 08:29:09.970 READ NATIVE MAX ADDRESS EXT
Error 243 occurred at disk power-on lifetime: 4448 hours (185 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 fa e5 30 e9 Error: UNC at LBA = 0x0930e5fa = 154199546
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 f6 e5 30 e9 00 08:29:12.864 READ DMA
27 00 00 00 00 00 e0 00 08:29:12.863 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 08:29:12.863 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 08:29:12.862 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 08:29:09.970 READ NATIVE MAX ADDRESS EXT
Error 242 occurred at disk power-on lifetime: 4448 hours (185 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 fa e5 30 e9 Error: UNC at LBA = 0x0930e5fa = 154199546
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 f6 e5 30 e9 00 08:29:07.089 READ DMA
27 00 00 00 00 00 e0 00 08:29:03.883 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 08:29:03.883 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 08:29:03.882 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 08:29:09.970 READ NATIVE MAX ADDRESS EXT
Error 241 occurred at disk power-on lifetime: 4448 hours (185 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 fa e5 30 e9 Error: UNC at LBA = 0x0930e5fa = 154199546
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 f6 e5 30 e9 00 08:29:07.089 READ DMA
27 00 00 00 00 00 e0 00 08:29:03.883 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 08:29:03.883 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 08:29:03.882 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 08:29:03.882 READ NATIVE MAX ADDRESS EXT
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 1 -
# 2 Short offline Completed without error 00% 0 -
# 3 Short offline Interrupted (host reset) 90% 0 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
More information about the vox-tech
mailing list