[vox-tech] Extremely slow bootup
Ken Bloom
kbloom at gmail.com
Tue May 3 13:53:37 PDT 2011
On Tue, 2011-05-03 at 09:14 -0700, Brian Lavender wrote:
> On Sun, May 01, 2011 at 11:53:10AM -0500, Chanoch (Ken) Bloom wrote:
> > My laptop is running Debian's 2.6.38-2-amd64 kernel, and when booting it
> > today, I discovered it was extremely slow to boot up (like 5 to 10
> > minutes). There's no particular obvious culprit -- it just seems each of
> > the initscripts takes longer. When debugging I tried to debug this, I
> > noticed that programs are also slow to load. The system is also very
> > slow to shut down. Again, there's no particular obvious culprit -- it
> > just seems each of the initscripts takes longer.
> >
> > Using kernel 2.6.38-1-amd64 is much speedier (within a couple of
> > minutes). I think kernel 2.6.38-1-amd64 has an older init ramdisk,
> > becuase I don't see the same udev errors between the two kernels.
> >
> > Any ideas how to debug this? My thought was that there might be a
> > problem with DMA, but "hdparm -d /dev/sda" complains that the IOCTL
> > isn't supported. I also don't see any suggestive differences between the
> > dmesg dumps between the kernels.
> >
> > One possibly relevant kernel difference is that 2.6.38-2-amd64 has
> > CONFIG_TRANSPARENT_HUGEPAGE=y
> > # CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS is not set
> > CONFIG_TRANSPARENT_HUGEPAGE_MADVISE=y
> >
> > It also has
> > CONFIG_BOOT_PRINTK_DELAY=y
> >
> > 2.6.38-1-amd64 doesn't have any of these.
> > My desktop computer is using 2.6.38-2-amd64 without problems.
>
> Ken,
>
> Did you figure it out? I am also wondering if somehow, your system dropped into
> Programmable IO (PIO). That would certainly slow things down. But, I would find
> it odd if it suddenly started doing it.
No, I haven't figured it out -- I haven't really had time. I'm also
guessing the system dropped into PIO, but I don't know why it would do
that, and I don't see any clear indication of that happening in the
dmesg logs, which are attached.
2.6.38-1.dmesg is the working kernel
2.6.38-2.dmesg is the broken kernel
-------------- next part --------------
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.38-1-amd64 (Debian 2.6.38-1) (ben at decadent.org.uk) (gcc version 4.4.5 (Debian 4.4.5-14) ) #1 SMP Wed Mar 16 17:38:02 UTC 2011
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-1-amd64 root=UUID=ebf57067-3bbb-4f8e-aa22-f460b30f3efe ro rootfstype=ext4 quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000004bef0000 (usable)
[ 0.000000] BIOS-e820: 000000004bef0000 - 000000004beff000 (ACPI data)
[ 0.000000] BIOS-e820: 000000004beff000 - 000000004bf00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000004bf00000 - 0000000050000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: Hewlett-Packard Presario V2000 (EC176UA#ABA) /3093, BIOS F.25 03/23/2006
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x4bef0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-DBFFF uncachable
[ 0.000000] DC000-DFFFF write-protect
[ 0.000000] E0000-E3FFF write-back
[ 0.000000] E4000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FFC0000000 write-back
[ 0.000000] 1 base 0040000000 mask FFF0000000 write-back
[ 0.000000] 2 base 004C000000 mask FFFC000000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [ffff8800000f8130] f8130
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-000000004bef0000
[ 0.000000] 0000000000 - 004be00000 page 2M
[ 0.000000] 004be00000 - 004bef0000 page 4k
[ 0.000000] kernel direct mapping tables up to 4bef0000 @ 1fffc000-20000000
[ 0.000000] RAMDISK: 36d90000 - 376c0000
[ 0.000000] ACPI: RSDP 00000000000f8080 00014 (v00 HP )
[ 0.000000] ACPI: RSDT 000000004bef8bf0 00034 (v01 HP 3093 20040323 LTP 00000000)
[ 0.000000] ACPI: FACP 000000004befee4b 00074 (v01 HP 3093 20040323 PTL 0000005F)
[ 0.000000] ACPI: DSDT 000000004bef8c24 06227 (v01 HP 3091 20040323 MSFT 0100000E)
[ 0.000000] ACPI: FACS 000000004befffc0 00040
[ 0.000000] ACPI: SSDT 000000004befeebf 000B5 (v01 PTLTD POWERNOW 20040323 LTP 00000001)
[ 0.000000] ACPI: APIC 000000004befef74 00050 (v01 PTLTD ? 3093 20040323 LTP 00000000)
[ 0.000000] ACPI: MCFG 000000004befefc4 0003C (v01 PTLTD MCFG 20040323 LTP 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000004bef0000
[ 0.000000] Initmem setup node 0 0000000000000000-000000004bef0000
[ 0.000000] NODE_DATA [000000004beeb000 - 000000004beeffff]
[ 0.000000] [ffffea0000000000-ffffea00011fffff] PMD -> [ffff88004a200000-ffff88004b3fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0004bef0
[ 0.000000] On node 0 totalpages: 310911
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3921 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 4197 pages used for memmap
[ 0.000000] DMA32 zone: 302731 pages, LIFO batch:31
[ 0.000000] SB4X0 revision 0x11
[ 0.000000] Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
[ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 50000000:aec00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88004bc00000 s82752 r8192 d23744 u2097152
[ 0.000000] pcpu-alloc: s82752 r8192 d23744 u2097152 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 306652
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-1-amd64 root=UUID=ebf57067-3bbb-4f8e-aa22-f460b30f3efe ro rootfstype=ext4 quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 19e000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Memory: 1207128k/1244096k available (3242k kernel code, 452k absent, 36516k reserved, 3442k data, 676k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:256 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1591.699 MHz processor.
[ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3183.39 BogoMIPS (lpj=6366796)
[ 0.004013] pid_max: default: 32768 minimum: 301
[ 0.004055] Security Framework initialized
[ 0.004065] SELinux: Disabled at boot.
[ 0.004362] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.009216] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.010637] Mount-cache hash table entries: 256
[ 0.010926] Initializing cgroup subsys ns
[ 0.010933] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.010938] Initializing cgroup subsys cpuacct
[ 0.010945] Initializing cgroup subsys devices
[ 0.010948] Initializing cgroup subsys freezer
[ 0.010952] Initializing cgroup subsys net_cls
[ 0.010956] Initializing cgroup subsys blkio
[ 0.011019] tseg: 004bf00000
[ 0.011022] mce: CPU supports 5 MCE banks
[ 0.011077] SMP alternatives: switching to UP code
[ 0.016823] Freeing SMP alternatives: 16k freed
[ 0.016847] ACPI: Core revision 20110112
[ 0.020119] Setting APIC routing to flat
[ 0.020483] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.061913] CPU0: AMD Turion(tm) 64 Mobile Technology ML-28 stepping 02
[ 0.064003] Performance Events: AMD PMU driver.
[ 0.064003] ... version: 0
[ 0.064003] ... bit width: 48
[ 0.064003] ... generic registers: 4
[ 0.064003] ... value mask: 0000ffffffffffff
[ 0.064003] ... max period: 00007fffffffffff
[ 0.064003] ... fixed-purpose events: 0
[ 0.064003] ... event mask: 000000000000000f
[ 0.064003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.064003] Brought up 1 CPUs
[ 0.064003] Total of 1 processors activated (3183.39 BogoMIPS).
[ 0.064003] devtmpfs: initialized
[ 0.069701] print_constraints: dummy:
[ 0.069768] NET: Registered protocol family 16
[ 0.069919] node 0 link 0: io port [1000, fffff]
[ 0.069924] TOM: 0000000050000000 aka 1280M
[ 0.069929] node 0 link 0: mmio [a0000, bffff]
[ 0.069933] node 0 link 0: mmio [f0000000, ffffffff]
[ 0.069937] node 0 link 0: mmio [e0000000, efffffff]
[ 0.069941] node 0 link 0: mmio [50000000, dfffffff]
[ 0.069945] bus: [00, ff] on node 0 link 0
[ 0.069949] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.069953] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.069956] bus: 00 index 2 [mem 0x50000000-0xfcffffffff]
[ 0.069976] ACPI: bus type pci registered
[ 0.070097] PCI: MMCONFIG for domain 0000 [bus 00-04] at [mem 0xe0000000-0xe04fffff] (base 0xe0000000)
[ 0.070102] PCI: not using MMCONFIG
[ 0.070105] PCI: Using configuration type 1 for base access
[ 0.070785] bio: create slab <bio-0> at 0
[ 0.071620] ACPI: EC: Look up EC in DSDT
[ 0.073909] ACPI: Interpreter enabled
[ 0.073914] ACPI: (supports S0 S3 S4 S5)
[ 0.073937] ACPI: Using IOAPIC for interrupt routing
[ 0.074028] PCI: MMCONFIG for domain 0000 [bus 00-04] at [mem 0xe0000000-0xe04fffff] (base 0xe0000000)
[ 0.074511] PCI: MMCONFIG at [mem 0xe0000000-0xe04fffff] reserved in ACPI motherboard resources
[ 0.080905] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[ 0.081063] ACPI: No dock devices found.
[ 0.081066] HEST: Table not found.
[ 0.081071] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.084111] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.085919] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.085924] pci_root PNP0A03:00: host bridge window [mem 0x000d4000-0x000d5fff] (ignored)
[ 0.085929] pci_root PNP0A03:00: host bridge window [mem 0x000d6000-0x000d7fff] (ignored)
[ 0.085933] pci_root PNP0A03:00: host bridge window [mem 0x000d8000-0x000d9fff] (ignored)
[ 0.085937] pci_root PNP0A03:00: host bridge window [mem 0x000da000-0x000dbfff] (ignored)
[ 0.085942] pci_root PNP0A03:00: host bridge window [mem 0x50000000-0xffffffff] (ignored)
[ 0.085947] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.085951] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.085966] pci 0000:00:00.0: [1002:5950] type 0 class 0x000600
[ 0.086013] pci 0000:00:01.0: [1002:5a3f] type 1 class 0x000604
[ 0.086092] pci 0000:00:13.0: [1002:4374] type 0 class 0x000c03
[ 0.086118] pci 0000:00:13.0: reg 10: [mem 0xd0000000-0xd0000fff]
[ 0.086239] pci 0000:00:13.1: [1002:4375] type 0 class 0x000c03
[ 0.086265] pci 0000:00:13.1: reg 10: [mem 0xd0001000-0xd0001fff]
[ 0.086390] pci 0000:00:13.2: [1002:4373] type 0 class 0x000c03
[ 0.086418] pci 0000:00:13.2: reg 10: [mem 0xd0002000-0xd0002fff]
[ 0.086520] pci 0000:00:13.2: supports D1 D2
[ 0.086524] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.086531] pci 0000:00:13.2: PME# disabled
[ 0.086572] pci 0000:00:14.0: [1002:4372] type 0 class 0x000c05
[ 0.086596] pci 0000:00:14.0: reg 10: [io 0x8400-0x840f]
[ 0.086611] pci 0000:00:14.0: reg 14: [mem 0xd0003000-0xd00033ff]
[ 0.086673] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.086723] pci 0000:00:14.1: [1002:4376] type 0 class 0x000101
[ 0.086748] pci 0000:00:14.1: reg 10: [io 0x01f0-0x01f7]
[ 0.086763] pci 0000:00:14.1: reg 14: [io 0x03f4-0x03f7]
[ 0.086777] pci 0000:00:14.1: reg 18: [io 0x0170-0x0177]
[ 0.086792] pci 0000:00:14.1: reg 1c: [io 0x0374-0x0377]
[ 0.086807] pci 0000:00:14.1: reg 20: [io 0x8410-0x841f]
[ 0.086880] pci 0000:00:14.3: [1002:4377] type 0 class 0x000601
[ 0.086990] pci 0000:00:14.4: [1002:4371] type 1 class 0x000604
[ 0.087061] pci 0000:00:14.5: [1002:4370] type 0 class 0x000401
[ 0.087086] pci 0000:00:14.5: reg 10: [mem 0xd0003400-0xd00034ff]
[ 0.087207] pci 0000:00:14.6: [1002:4378] type 0 class 0x000703
[ 0.087233] pci 0000:00:14.6: reg 10: [mem 0xd0003800-0xd00038ff]
[ 0.087354] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
[ 0.087382] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
[ 0.087407] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
[ 0.087432] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
[ 0.087463] PCI: peer root bus 00 res updated from pci conf
[ 0.087499] pci 0000:01:05.0: [1002:5955] type 0 class 0x000300
[ 0.087510] pci 0000:01:05.0: reg 10: [mem 0xd4000000-0xd7ffffff pref]
[ 0.087517] pci 0000:01:05.0: reg 14: [io 0x9000-0x90ff]
[ 0.087523] pci 0000:01:05.0: reg 18: [mem 0xd0100000-0xd010ffff]
[ 0.087541] pci 0000:01:05.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.087552] pci 0000:01:05.0: supports D1 D2
[ 0.087571] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.087577] pci 0000:00:01.0: bridge window [io 0x9000-0x9fff]
[ 0.087582] pci 0000:00:01.0: bridge window [mem 0xd0100000-0xd01fffff]
[ 0.087588] pci 0000:00:01.0: bridge window [mem 0xd4000000-0xd7ffffff 64bit pref]
[ 0.087630] pci 0000:05:00.0: [10ec:8139] type 0 class 0x000200
[ 0.087662] pci 0000:05:00.0: reg 10: [io 0xa000-0xa0ff]
[ 0.087679] pci 0000:05:00.0: reg 14: [mem 0xd0208000-0xd02080ff]
[ 0.087783] pci 0000:05:00.0: supports D1 D2
[ 0.087787] pci 0000:05:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.087794] pci 0000:05:00.0: PME# disabled
[ 0.087826] pci 0000:05:02.0: [14e4:4318] type 0 class 0x000280
[ 0.087850] pci 0000:05:02.0: reg 10: [mem 0xd0204000-0xd0205fff]
[ 0.087986] pci 0000:05:09.0: [104c:8031] type 2 class 0x000607
[ 0.088026] pci 0000:05:09.0: reg 10: [mem 0x00000000-0x00000fff]
[ 0.088062] pci 0000:05:09.0: supports D1 D2
[ 0.088065] pci 0000:05:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.088072] pci 0000:05:09.0: PME# disabled
[ 0.088109] pci 0000:05:09.2: [104c:8032] type 0 class 0x000c00
[ 0.088140] pci 0000:05:09.2: reg 10: [mem 0xd0208800-0xd0208fff]
[ 0.088159] pci 0000:05:09.2: reg 14: [mem 0xd0200000-0xd0203fff]
[ 0.088267] pci 0000:05:09.2: supports D1 D2
[ 0.088270] pci 0000:05:09.2: PME# supported from D0 D1 D2 D3hot
[ 0.088278] pci 0000:05:09.2: PME# disabled
[ 0.088312] pci 0000:05:09.3: [104c:8033] type 0 class 0x000180
[ 0.088342] pci 0000:05:09.3: reg 10: [mem 0xd0206000-0xd0207fff]
[ 0.088463] pci 0000:05:09.3: supports D1 D2
[ 0.088466] pci 0000:05:09.3: PME# supported from D0 D1 D2 D3hot
[ 0.088474] pci 0000:05:09.3: PME# disabled
[ 0.088510] pci 0000:05:09.4: [104c:8034] type 0 class 0x000805
[ 0.088541] pci 0000:05:09.4: reg 10: [mem 0xd0209400-0xd02094ff]
[ 0.088560] pci 0000:05:09.4: reg 14: [mem 0xd0209000-0xd02090ff]
[ 0.088578] pci 0000:05:09.4: reg 18: [mem 0xd0208400-0xd02084ff]
[ 0.088670] pci 0000:05:09.4: supports D1 D2
[ 0.088673] pci 0000:05:09.4: PME# supported from D0 D1 D2 D3hot
[ 0.088681] pci 0000:05:09.4: PME# disabled
[ 0.088747] pci 0000:00:14.4: PCI bridge to [bus 05-05] (subtractive decode)
[ 0.088757] pci 0000:00:14.4: bridge window [io 0xa000-0xafff]
[ 0.088765] pci 0000:00:14.4: bridge window [mem 0xd0200000-0xd02fffff]
[ 0.088772] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.088777] pci 0000:00:14.4: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.088781] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.088786] pci 0000:00:14.4: bridge window [mem 0x50000000-0xfcffffffff] (subtractive decode)
[ 0.088852] pci_bus 0000:06: [bus 06-09] partially hidden behind transparent bridge 0000:05 [bus 05-05]
[ 0.088871] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.088986] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.089067] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.089140] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.092245] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
[ 0.092312] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
[ 0.092377] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
[ 0.092441] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
[ 0.092506] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
[ 0.092570] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
[ 0.092635] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
[ 0.092699] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
[ 0.092879] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.092886] vgaarb: loaded
[ 0.092945] PCI: Using ACPI for IRQ routing
[ 0.092949] PCI: pci_cache_line_size set to 64 bytes
[ 0.093063] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.093068] reserve RAM buffer: 000000004bef0000 - 000000004bffffff
[ 0.095407] pnp: PnP ACPI init
[ 0.095448] ACPI: bus type pnp registered
[ 0.096495] pnp 00:00: [bus 00-ff]
[ 0.096499] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.096503] pnp 00:00: [mem 0x000c0000-0x000c1fff window]
[ 0.096513] pnp 00:00: [mem 0x000c2000-0x000c3fff window]
[ 0.096517] pnp 00:00: [mem 0x000c4000-0x000c5fff window]
[ 0.096521] pnp 00:00: [mem 0x000c6000-0x000c7fff window]
[ 0.096524] pnp 00:00: [mem 0x000c8000-0x000c9fff window]
[ 0.096528] pnp 00:00: [mem 0x000ca000-0x000cbfff window]
[ 0.096532] pnp 00:00: [mem 0x000cc000-0x000cdfff window]
[ 0.096535] pnp 00:00: [mem 0x000ce000-0x000cffff window]
[ 0.096539] pnp 00:00: [mem 0x000d0000-0x000d1fff window]
[ 0.096542] pnp 00:00: [mem 0x000d2000-0x000d3fff window]
[ 0.096546] pnp 00:00: [mem 0x000d4000-0x000d5fff window]
[ 0.096550] pnp 00:00: [mem 0x000d6000-0x000d7fff window]
[ 0.096553] pnp 00:00: [mem 0x000d8000-0x000d9fff window]
[ 0.096557] pnp 00:00: [mem 0x000da000-0x000dbfff window]
[ 0.096560] pnp 00:00: [mem 0x000dc000-0x000ddfff window]
[ 0.096564] pnp 00:00: [mem 0x000de000-0x000dffff window]
[ 0.096568] pnp 00:00: [mem 0x000e0000-0x000e1fff window]
[ 0.096571] pnp 00:00: [mem 0x000e2000-0x000e3fff window]
[ 0.096575] pnp 00:00: [mem 0x000e4000-0x000e5fff window]
[ 0.096578] pnp 00:00: [mem 0x000e6000-0x000e7fff window]
[ 0.096582] pnp 00:00: [mem 0x000e8000-0x000e9fff window]
[ 0.096586] pnp 00:00: [mem 0x000ea000-0x000ebfff window]
[ 0.096589] pnp 00:00: [mem 0x000ec000-0x000edfff window]
[ 0.096593] pnp 00:00: [mem 0x000ee000-0x000effff window]
[ 0.096597] pnp 00:00: [mem 0x50000000-0xffffffff window]
[ 0.096600] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.096604] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.096607] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.096697] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.096772] pnp 00:01: [mem 0xe0000000-0xefffffff]
[ 0.096776] pnp 00:01: [mem 0xfec00000-0xfec00fff]
[ 0.096780] pnp 00:01: [mem 0xfee00000-0xfee00fff]
[ 0.096895] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.096900] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.096905] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.096910] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.097176] pnp 00:02: [io 0x0000-0x001f]
[ 0.097179] pnp 00:02: [io 0x0080-0x008f]
[ 0.097182] pnp 00:02: [io 0x00c0-0x00df]
[ 0.097186] pnp 00:02: [dma 4]
[ 0.097237] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.097252] pnp 00:03: [io 0x00f0-0x00fe]
[ 0.097272] pnp 00:03: [irq 13]
[ 0.097323] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.097341] pnp 00:04: [io 0x0070-0x0071]
[ 0.097348] pnp 00:04: [irq 8]
[ 0.097391] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.097405] pnp 00:05: [io 0x0061]
[ 0.097453] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.097470] pnp 00:06: [io 0x0060]
[ 0.097473] pnp 00:06: [io 0x0064]
[ 0.097480] pnp 00:06: [irq 1]
[ 0.097524] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.097548] pnp 00:07: [irq 12]
[ 0.097601] pnp 00:07: Plug and Play ACPI device, IDs SYN011c SYN0100 SYN0002 PNP0f13 (active)
[ 0.097623] pnp 00:08: [io 0x002e-0x002f]
[ 0.097627] pnp 00:08: [io 0x0072-0x0073]
[ 0.097630] pnp 00:08: [io 0x1080]
[ 0.097633] pnp 00:08: [io 0x00b0-0x00b1]
[ 0.097636] pnp 00:08: [io 0x0092]
[ 0.097639] pnp 00:08: [io 0x0220-0x022f]
[ 0.097642] pnp 00:08: [io 0x040b]
[ 0.097646] pnp 00:08: [io 0x04d0-0x04d1]
[ 0.097649] pnp 00:08: [io 0x04d6]
[ 0.097652] pnp 00:08: [io 0x0530-0x0537]
[ 0.097655] pnp 00:08: [io 0x0c00-0x0c01]
[ 0.097658] pnp 00:08: [io 0x0c14]
[ 0.097661] pnp 00:08: [io 0x0c50-0x0c52]
[ 0.097664] pnp 00:08: [io 0x0c6c]
[ 0.097667] pnp 00:08: [io 0x0c6f]
[ 0.097670] pnp 00:08: [io 0x0cd4-0x0cd5]
[ 0.097674] pnp 00:08: [io 0x0cd6-0x0cd7]
[ 0.097677] pnp 00:08: [io 0x0cd8-0x0cdf]
[ 0.097680] pnp 00:08: [io 0x8000-0x805f]
[ 0.097684] pnp 00:08: [io 0x8100-0x81ff window]
[ 0.097687] pnp 00:08: [io 0x8200-0x82ff window]
[ 0.097691] pnp 00:08: [io 0x0f40-0x0f47]
[ 0.097694] pnp 00:08: [io 0x087f]
[ 0.097786] system 00:08: [io 0x1080] has been reserved
[ 0.097791] system 00:08: [io 0x0220-0x022f] has been reserved
[ 0.097795] system 00:08: [io 0x040b] has been reserved
[ 0.097799] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.097804] system 00:08: [io 0x04d6] has been reserved
[ 0.097808] system 00:08: [io 0x0530-0x0537] has been reserved
[ 0.097812] system 00:08: [io 0x0c00-0x0c01] has been reserved
[ 0.097817] system 00:08: [io 0x0c14] has been reserved
[ 0.097821] system 00:08: [io 0x0c50-0x0c52] has been reserved
[ 0.097825] system 00:08: [io 0x0c6c] has been reserved
[ 0.097829] system 00:08: [io 0x0c6f] has been reserved
[ 0.097834] system 00:08: [io 0x0cd4-0x0cd5] has been reserved
[ 0.097838] system 00:08: [io 0x0cd6-0x0cd7] has been reserved
[ 0.097843] system 00:08: [io 0x0cd8-0x0cdf] has been reserved
[ 0.097847] system 00:08: [io 0x8000-0x805f] has been reserved
[ 0.097852] system 00:08: [io 0x8100-0x81ff window] has been reserved
[ 0.097857] system 00:08: [io 0x8200-0x82ff window] has been reserved
[ 0.097861] system 00:08: [io 0x0f40-0x0f47] has been reserved
[ 0.097866] system 00:08: [io 0x087f] has been reserved
[ 0.097870] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.097950] pnp 00:09: [mem 0x000e0000-0x000fffff]
[ 0.097954] pnp 00:09: [mem 0xfff80000-0xffffffff]
[ 0.097957] pnp 00:09: [mem 0x00000000-0x00000fff]
[ 0.097976] pnp 00:09: disabling [mem 0x00000000-0x00000fff] because it overlaps 0000:01:05.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 0.098033] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.098038] system 00:09: [mem 0xfff80000-0xffffffff] has been reserved
[ 0.098042] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.098100] pnp: PnP ACPI: found 10 devices
[ 0.098100] ACPI: ACPI bus type pnp unregistered
[ 0.106541] Switching to clocksource acpi_pm
[ 0.106626] pci 0000:00:14.4: BAR 15: assigned [mem 0x50000000-0x53ffffff pref]
[ 0.106633] pci 0000:01:05.0: BAR 6: assigned [mem 0xd0120000-0xd013ffff pref]
[ 0.106639] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.106643] pci 0000:00:01.0: bridge window [io 0x9000-0x9fff]
[ 0.106648] pci 0000:00:01.0: bridge window [mem 0xd0100000-0xd01fffff]
[ 0.106653] pci 0000:00:01.0: bridge window [mem 0xd4000000-0xd7ffffff 64bit pref]
[ 0.106662] pci 0000:05:09.0: BAR 15: assigned [mem 0x50000000-0x53ffffff pref]
[ 0.106670] pci 0000:05:09.0: BAR 16: assigned [mem 0x54000000-0x57ffffff]
[ 0.106676] pci 0000:05:09.0: BAR 0: assigned [mem 0xd020a000-0xd020afff]
[ 0.106686] pci 0000:05:09.0: BAR 0: set to [mem 0xd020a000-0xd020afff] (PCI address [0xd020a000-0xd020afff])
[ 0.106691] pci 0000:05:09.0: BAR 13: assigned [io 0xa400-0xa4ff]
[ 0.106696] pci 0000:05:09.0: BAR 14: assigned [io 0xa800-0xa8ff]
[ 0.106700] pci 0000:05:09.0: CardBus bridge to [bus 06-09]
[ 0.106704] pci 0000:05:09.0: bridge window [io 0xa400-0xa4ff]
[ 0.106711] pci 0000:05:09.0: bridge window [io 0xa800-0xa8ff]
[ 0.106719] pci 0000:05:09.0: bridge window [mem 0x50000000-0x53ffffff pref]
[ 0.106727] pci 0000:05:09.0: bridge window [mem 0x54000000-0x57ffffff]
[ 0.106735] pci 0000:00:14.4: PCI bridge to [bus 05-05]
[ 0.106740] pci 0000:00:14.4: bridge window [io 0xa000-0xafff]
[ 0.106748] pci 0000:00:14.4: bridge window [mem 0xd0200000-0xd02fffff]
[ 0.106755] pci 0000:00:14.4: bridge window [mem 0x50000000-0x53ffffff pref]
[ 0.106806] pci 0000:05:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.106814] pci 0000:05:09.0: setting latency timer to 64
[ 0.106821] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.106825] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.106829] pci_bus 0000:00: resource 6 [mem 0x50000000-0xfcffffffff]
[ 0.106834] pci_bus 0000:01: resource 0 [io 0x9000-0x9fff]
[ 0.106838] pci_bus 0000:01: resource 1 [mem 0xd0100000-0xd01fffff]
[ 0.106842] pci_bus 0000:01: resource 2 [mem 0xd4000000-0xd7ffffff 64bit pref]
[ 0.106847] pci_bus 0000:05: resource 0 [io 0xa000-0xafff]
[ 0.106851] pci_bus 0000:05: resource 1 [mem 0xd0200000-0xd02fffff]
[ 0.106855] pci_bus 0000:05: resource 2 [mem 0x50000000-0x53ffffff pref]
[ 0.106859] pci_bus 0000:05: resource 4 [io 0x0000-0xffff]
[ 0.106863] pci_bus 0000:05: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.106867] pci_bus 0000:05: resource 6 [mem 0x50000000-0xfcffffffff]
[ 0.106871] pci_bus 0000:06: resource 0 [io 0xa400-0xa4ff]
[ 0.106875] pci_bus 0000:06: resource 1 [io 0xa800-0xa8ff]
[ 0.106879] pci_bus 0000:06: resource 2 [mem 0x50000000-0x53ffffff pref]
[ 0.106883] pci_bus 0000:06: resource 3 [mem 0x54000000-0x57ffffff]
[ 0.106955] NET: Registered protocol family 2
[ 0.107118] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.107118] Switched to NOHz mode on CPU #0
[ 0.107118] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.111896] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.113358] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.113364] TCP reno registered
[ 0.113386] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.113454] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.113676] NET: Registered protocol family 1
[ 0.113693] pci 0000:00:00.0: MSI quirk detected; MSI disabled
[ 0.113704] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
[ 0.780086] pci 0000:01:05.0: Boot video device
[ 0.780116] PCI: CLS 32 bytes, default 64
[ 0.780197] Unpacking initramfs...
[ 1.152557] Freeing initrd memory: 9408k freed
[ 1.166492] audit: initializing netlink socket (disabled)
[ 1.166514] type=2000 audit(1304266028.163:1): initialized
[ 1.179164] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.182107] VFS: Disk quotas dquot_6.5.2
[ 1.182196] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.182337] msgmni has been set to 2376
[ 1.182598] alg: No test for stdrng (krng)
[ 1.182682] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.182687] io scheduler noop registered
[ 1.182690] io scheduler deadline registered
[ 1.182743] io scheduler cfq registered (default)
[ 1.183118] ERST: Table is not found!
[ 1.183245] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.183723] serial 0000:00:14.6: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.183734] serial 0000:00:14.6: PCI INT B disabled
[ 1.183883] Linux agpgart interface v0.103
[ 1.184073] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 1.185505] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.185517] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.185717] mousedev: PS/2 mouse device common for all mice
[ 1.185791] rtc_cmos 00:04: RTC can wake from S4
[ 1.185862] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.185896] rtc0: alarms up to one month, 114 bytes nvram
[ 1.185911] cpuidle: using governor ladder
[ 1.185914] cpuidle: using governor menu
[ 1.186269] TCP cubic registered
[ 1.186463] NET: Registered protocol family 10
[ 1.187293] Mobile IPv6
[ 1.187297] NET: Registered protocol family 17
[ 1.187303] Registering the dns_resolver key type
[ 1.187484] PM: Hibernation image not present or could not be loaded.
[ 1.187500] registered taskstats version 1
[ 1.187851] rtc_cmos 00:04: setting system clock to 2011-05-01 16:07:08 UTC (1304266028)
[ 1.187894] Initalizing network drop monitor service
[ 1.190127] Freeing unused kernel memory: 676k freed
[ 1.190791] Write protecting the kernel read-only data: 6144k
[ 1.199164] Freeing unused kernel memory: 836k freed
[ 1.207951] Freeing unused kernel memory: 776k freed
[ 1.221278] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.244271] udev[69]: starting version 166
[ 1.516141] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.516146] ACPI: Thermal Zone [THRM] (75 C)
[ 1.536867] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 1.536977] 8139cp 0000:05:00.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 1.576362] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 1.576724] 8139too 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.578141] 8139too 0000:05:00.0: eth0: RealTek RTL8139 at 0xffffc90000f64000, 00:c0:9f:b2:ff:35, IRQ 18
[ 1.585276] SCSI subsystem initialized
[ 1.588406] firewire_ohci 0000:05:09.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 1.620045] sdhci: Secure Digital Host Controller Interface driver
[ 1.620049] sdhci: Copyright(c) Pierre Ossman
[ 1.642340] usbcore: registered new interface driver usbfs
[ 1.642556] usbcore: registered new interface driver hub
[ 1.642627] usbcore: registered new device driver usb
[ 1.644354] firewire_ohci: Added fw-ohci device 0000:05:09.2, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[ 1.646941] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.647339] sdhci-pci 0000:05:09.4: SDHCI controller found [104c:8034] (rev 0)
[ 1.647360] sdhci-pci 0000:05:09.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.647441] mmc0: no vmmc regulator found
[ 1.647853] ehci_hcd 0000:00:13.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.647875] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 1.647913] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
[ 1.648051] ehci_hcd 0000:00:13.2: irq 19, io mem 0xd0002000
[ 1.648281] Registered led device: mmc0::
[ 1.667342] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.667384] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.667389] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.667393] usb usb1: Product: EHCI Host Controller
[ 1.667396] usb usb1: Manufacturer: Linux 2.6.38-1-amd64 ehci_hcd
[ 1.667399] usb usb1: SerialNumber: 0000:00:13.2
[ 1.667712] hub 1-0:1.0: USB hub found
[ 1.667721] hub 1-0:1.0: 8 ports detected
[ 1.677644] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.677746] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.677786] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.677807] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 1.677844] ohci_hcd 0000:00:13.0: irq 19, io mem 0xd0000000
[ 1.677858] mmc0: SDHCI controller on PCI [0000:05:09.4] using PIO
[ 1.677890] mmc1: no vmmc regulator found
[ 1.678004] Registered led device: mmc1::
[ 1.678102] mmc1: SDHCI controller on PCI [0000:05:09.4] using PIO
[ 1.678130] mmc2: no vmmc regulator found
[ 1.678195] Registered led device: mmc2::
[ 1.678282] mmc2: SDHCI controller on PCI [0000:05:09.4] using PIO
[ 1.680375] b43-pci-bridge 0000:05:02.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.681256] libata version 3.00 loaded.
[ 1.700073] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x0D, vendor 0x4243)
[ 1.700086] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x09, vendor 0x4243)
[ 1.700098] ssb: Core 2 found: PCI (cc 0x804, rev 0x0C, vendor 0x4243)
[ 1.700109] ssb: Core 3 found: PCMCIA (cc 0x80D, rev 0x07, vendor 0x4243)
[ 1.736068] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.736072] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.736076] usb usb2: Product: OHCI Host Controller
[ 1.736079] usb usb2: Manufacturer: Linux 2.6.38-1-amd64 ohci_hcd
[ 1.736083] usb usb2: SerialNumber: 0000:00:13.0
[ 1.736395] hub 2-0:1.0: USB hub found
[ 1.736407] hub 2-0:1.0: 4 ports detected
[ 1.736617] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.736644] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 1.736658] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[ 1.736691] ohci_hcd 0000:00:13.1: irq 19, io mem 0xd0001000
[ 1.740102] ssb: Sonics Silicon Backplane found on PCI device 0000:05:02.0
[ 1.796069] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.796076] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.796080] usb usb3: Product: OHCI Host Controller
[ 1.796083] usb usb3: Manufacturer: Linux 2.6.38-1-amd64 ohci_hcd
[ 1.796086] usb usb3: SerialNumber: 0000:00:13.1
[ 1.796411] hub 3-0:1.0: USB hub found
[ 1.796423] hub 3-0:1.0: 4 ports detected
[ 1.797690] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.797752] pata_atiixp 0000:00:14.1: setting latency timer to 64
[ 1.801298] scsi0 : pata_atiixp
[ 1.803891] scsi1 : pata_atiixp
[ 1.805168] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8410 irq 14
[ 1.805173] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8418 irq 15
[ 1.985971] ata2.00: ATAPI: PIONEER DVDRW DVR-K15, 1.11, max MWDMA2
[ 1.987176] ata1.00: ATA-6: FUJITSU MHT2080AT PL, 0022, max UDMA/100
[ 1.987181] ata1.00: 156301488 sectors, multi 16: LBA
[ 2.017514] ata2.00: configured for MWDMA2
[ 2.017705] ata1.00: configured for UDMA/100
[ 2.017870] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHT2080A 0022 PQ: 0 ANSI: 5
[ 2.030924] scsi 1:0:0:0: CD-ROM PIONEER DVDRW DVR-K15 1.11 PQ: 0 ANSI: 5
[ 2.060517] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 2.060587] sd 0:0:0:0: [sda] Write Protect is off
[ 2.060592] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.060620] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.073066] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 2.073071] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.073567] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.105689] sda: sda1 sda2
[ 2.106128] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.125513] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.126139] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.144173] firewire_core: created device fw0: GUID 00c09f00006055f9, S400
[ 2.176051] Refined TSC clocksource calibration: 1591.844 MHz.
[ 2.176058] Switching to clocksource tsc
[ 2.588576] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[ 2.588581] EXT4-fs (sda1): write access will be enabled during recovery
[ 3.772601] EXT4-fs (sda1): recovery complete
[ 3.776562] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 6.452504] <30>udevd[284]: starting version 168
[ 7.504264] <30>udevd[284]: converting old udev database
[ 7.745490] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 7.745500] ACPI: Power Button [PWRB]
[ 7.745604] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 7.745609] ACPI: Sleep Button [SLPB]
[ 7.745708] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[ 7.746087] ACPI: Lid Switch [LID]
[ 7.746208] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 7.746213] ACPI: Power Button [PWRF]
[ 7.854705] ACPI: acpi_idle registered with cpuidle
[ 7.854773] Marking TSC unstable due to TSC halts in idle
[ 7.856965] Switching to clocksource acpi_pm
[ 7.962591] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:0e/LNXVIDEO:00/input/input5
[ 7.962602] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 8.319091] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 8.418069] wmi: Mapper loaded
[ 8.776699] ACPI: Battery Slot [BAT1] (battery present)
[ 8.855245] cfg80211: Calling CRDA to update world regulatory domain
[ 9.038289] MCE: In-kernel MCE decoding enabled.
[ 9.044469] yenta_cardbus 0000:05:09.0: CardBus bridge found [103c:3091]
[ 9.044497] yenta_cardbus 0000:05:09.0: Enabling burst memory read transactions
[ 9.044507] yenta_cardbus 0000:05:09.0: Using CSCINT to route CSC interrupts to PCI
[ 9.044511] yenta_cardbus 0000:05:09.0: Routing CardBus interrupts to PCI
[ 9.044519] yenta_cardbus 0000:05:09.0: TI: mfunc 0x01a01b22, devctl 0x64
[ 9.119961] input: HP WMI hotkeys as /devices/virtual/input/input7
[ 9.149616] Synaptics Touchpad, model: 1, fw: 5.10, id: 0x258eb1, caps: 0xa04713/0x0/0x0
[ 9.183328] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[ 9.250594] ACPI: AC Adapter [ACAD] (on-line)
[ 9.276832] yenta_cardbus 0000:05:09.0: ISA IRQ mask 0x0ce8, PCI irq 17
[ 9.276840] yenta_cardbus 0000:05:09.0: Socket status: 30000006
[ 9.276845] pci_bus 0000:05: Raising subordinate bus# of parent bus (#05) from #05 to #09
[ 9.276859] yenta_cardbus 0000:05:09.0: pcmcia: parent PCI bridge window: [io 0xa000-0xafff]
[ 9.276865] yenta_cardbus 0000:05:09.0: pcmcia: parent PCI bridge window: [mem 0xd0200000-0xd02fffff]
[ 9.276871] pcmcia_socket pcmcia_socket0: cs: memory probe 0xd0200000-0xd02fffff: excluding 0xd0200000-0xd020ffff
[ 9.276899] yenta_cardbus 0000:05:09.0: pcmcia: parent PCI bridge window: [mem 0x50000000-0x53ffffff pref]
[ 9.276904] pcmcia_socket pcmcia_socket0: cs: memory probe 0x50000000-0x53ffffff: excluding 0x50000000-0x53ffffff
[ 9.586971] EDAC MC: Ver: 2.1.0 Mar 16 2011
[ 9.650548] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 9.650763] tifm_7xx1 0000:05:09.3: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 10.187183] EDAC amd64_edac: v3.3.0
[ 10.187275] EDAC amd64: DRAM ECC disabled.
[ 10.187280] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 10.187282] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 10.187285] (Note that use of the override may cause unknown side effects.)
[ 10.269981] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8400, revision 0
[ 10.488148] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 10.741561] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xfffff
[ 10.741639] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
[ 10.741717] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: clean.
[ 11.070497] b43-phy0: Broadcom 4318 WLAN found (core revision 9)
[ 11.321086] [drm] Initialized drm 1.1.0 20060810
[ 11.748742] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 11.749702] Registered led device: b43-phy0::radio
[ 11.749727] Broadcom 43xx driver loaded [ Features: PMLS, Firmware-ID: FW13 ]
[ 11.906197] [drm] radeon kernel modesetting enabled.
[ 11.906408] radeon 0000:01:05.0: power state changed by ACPI to D0
[ 11.906415] radeon 0000:01:05.0: power state changed by ACPI to D0
[ 11.906425] radeon 0000:01:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 11.912814] [drm] initializing kernel modesetting (RS480 0x1002:0x5955).
[ 11.912874] [drm] register mmio base: 0xD0100000
[ 11.912877] [drm] register mmio size: 65536
[ 11.913154] [drm] Generation 2 PCI interface, using max accessible memory
[ 11.913162] radeon 0000:01:05.0: VRAM: 64M 0x000000004C000000 - 0x000000004FFFFFFF (64M used)
[ 11.913166] radeon 0000:01:05.0: GTT: 512M 0x0000000060000000 - 0x000000007FFFFFFF
[ 11.913182] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 11.913185] [drm] Driver supports precise vblank timestamp query.
[ 11.913202] [drm] radeon: irq initialized.
[ 11.913453] [drm] Detected VRAM RAM=64M, BAR=64M
[ 11.913458] [drm] RAM width 128bits DDR
[ 11.913559] [TTM] Zone kernel: Available graphics memory: 609420 kiB.
[ 11.913562] [TTM] Initializing pool allocator.
[ 11.913596] [drm] radeon: 64M of VRAM memory ready
[ 11.913600] [drm] radeon: 512M of GTT memory ready.
[ 11.913639] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 11.919843] [drm] radeon: 2 quad pipes, 1 z pipes initialized.
[ 11.927064] radeon 0000:01:05.0: WB enabled
[ 11.927884] [drm] Loading R300 Microcode
[ 12.246724] ATI IXP AC97 controller 0000:00:14.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 12.260826] [drm] radeon: ring at 0x0000000060001000
[ 12.260849] [drm] ring test succeeded in 1 usecs
[ 12.261033] [drm] radeon: ib pool ready.
[ 12.261122] [drm] ib test succeeded in 0 usecs
[ 12.261449] [drm] Panel ID String: SEC
[ 12.261452] [drm] Panel Size 1280x768
[ 12.261592] [drm] Radeon Display Connectors
[ 12.261595] [drm] Connector 0:
[ 12.261597] [drm] VGA
[ 12.261601] [drm] DDC: 0x68 0x68 0x68 0x68 0x68 0x68 0x68 0x68
[ 12.261603] [drm] Encoders:
[ 12.261606] [drm] CRT1: INTERNAL_DAC2
[ 12.261609] [drm] Connector 1:
[ 12.261611] [drm] LVDS
[ 12.261615] [drm] DDC: 0x198 0x198 0x19c 0x19c 0x1a0 0x1a0 0x1a4 0x1a4
[ 12.261618] [drm] Encoders:
[ 12.261620] [drm] LCD1: INTERNAL_LVDS
[ 12.261622] [drm] Connector 2:
[ 12.261625] [drm] S-video
[ 12.261627] [drm] Encoders:
[ 12.261629] [drm] TV1: INTERNAL_DAC2
[ 12.296152] ATI IXP MC97 controller 0000:00:14.6: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 12.327244] [drm] radeon: power management initialized
[ 12.408093] MC'97 0 converters and GPIO not ready (0x1)
[ 12.435708] [drm] fb mappable at 0xD4040000
[ 12.435713] [drm] vram apper at 0xD4000000
[ 12.435715] [drm] size 3932160
[ 12.435718] [drm] fb depth is 24
[ 12.435720] [drm] pitch is 5120
[ 12.483455] Console: switching to colour frame buffer device 160x48
[ 12.490641] fb0: radeondrmfb frame buffer device
[ 12.490644] drm: registered panic notifier
[ 12.490981] [drm] Initialized radeon 2.8.0 20080528 for 0000:01:05.0 on minor 0
[ 16.015577] Adding 522108k swap on /dev/sda2. Priority:-1 extents:1 across:522108k
[ 16.022613] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 16.288149] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 16.553459] Uniform Multi-Platform E-IDE driver
[ 16.625513] ide-cd driver 5.00
[ 16.634460] ide-gd driver 1.18
[ 16.648959] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
[ 16.711061] powernow-k8: Found 1 AMD Turion(tm) 64 Mobile Technology ML-28 (1 cpu cores) (version 2.20.00)
[ 16.711126] powernow-k8: 0 : fid 0x8 (1600 MHz), vid 0x4
[ 16.711130] powernow-k8: 1 : fid 0x0 (800 MHz), vid 0x16
[ 16.795838] fuse init (API version 7.16)
[ 37.599679] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input9
[ 41.860784] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 42.424082] b43-phy0: Loading firmware version 478.104 (2008-07-01 00:50:23)
[ 42.489903] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 52.112045] eth0: no IPv6 routers present
[ 54.146575] lp: driver loaded but no devices found
[ 54.222209] ppdev: user-space parallel port driver
[ 82.458843] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
-------------- next part --------------
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.38-2-amd64 (Debian 2.6.38-4) (ben at decadent.org.uk) (gcc version 4.4.6 (Debian 4.4.6-2) ) #1 SMP Sat Apr 23 18:47:49 UTC 2011
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-2-amd64 root=UUID=ebf57067-3bbb-4f8e-aa22-f460b30f3efe ro single rootfstype=ext4
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000004bef0000 (usable)
[ 0.000000] BIOS-e820: 000000004bef0000 - 000000004beff000 (ACPI data)
[ 0.000000] BIOS-e820: 000000004beff000 - 000000004bf00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000004bf00000 - 0000000050000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: Hewlett-Packard Presario V2000 (EC176UA#ABA) /3093, BIOS F.25 03/23/2006
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x4bef0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-DBFFF uncachable
[ 0.000000] DC000-DFFFF write-protect
[ 0.000000] E0000-E3FFF write-back
[ 0.000000] E4000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FFC0000000 write-back
[ 0.000000] 1 base 0040000000 mask FFF0000000 write-back
[ 0.000000] 2 base 004C000000 mask FFFC000000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [ffff8800000f8130] f8130
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-000000004bef0000
[ 0.000000] 0000000000 - 004be00000 page 2M
[ 0.000000] 004be00000 - 004bef0000 page 4k
[ 0.000000] kernel direct mapping tables up to 4bef0000 @ 1fffc000-20000000
[ 0.000000] RAMDISK: 36d84000 - 376ba000
[ 0.000000] ACPI: RSDP 00000000000f8080 00014 (v00 HP )
[ 0.000000] ACPI: RSDT 000000004bef8bf0 00034 (v01 HP 3093 20040323 LTP 00000000)
[ 0.000000] ACPI: FACP 000000004befee4b 00074 (v01 HP 3093 20040323 PTL 0000005F)
[ 0.000000] ACPI: DSDT 000000004bef8c24 06227 (v01 HP 3091 20040323 MSFT 0100000E)
[ 0.000000] ACPI: FACS 000000004befffc0 00040
[ 0.000000] ACPI: SSDT 000000004befeebf 000B5 (v01 PTLTD POWERNOW 20040323 LTP 00000001)
[ 0.000000] ACPI: APIC 000000004befef74 00050 (v01 PTLTD ? 3093 20040323 LTP 00000000)
[ 0.000000] ACPI: MCFG 000000004befefc4 0003C (v01 PTLTD MCFG 20040323 LTP 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000004bef0000
[ 0.000000] Initmem setup node 0 0000000000000000-000000004bef0000
[ 0.000000] NODE_DATA [000000004beeb000 - 000000004beeffff]
[ 0.000000] [ffffea0000000000-ffffea00011fffff] PMD -> [ffff88004a200000-ffff88004b3fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0004bef0
[ 0.000000] On node 0 totalpages: 310911
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3921 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 4197 pages used for memmap
[ 0.000000] DMA32 zone: 302731 pages, LIFO batch:31
[ 0.000000] SB4X0 revision 0x11
[ 0.000000] Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
[ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 50000000:aec00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88004bc00000 s82752 r8192 d23744 u2097152
[ 0.000000] pcpu-alloc: s82752 r8192 d23744 u2097152 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 306652
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-2-amd64 root=UUID=ebf57067-3bbb-4f8e-aa22-f460b30f3efe ro single rootfstype=ext4
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 19e000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Memory: 1207104k/1244096k available (3260k kernel code, 452k absent, 36540k reserved, 3425k data, 676k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:256 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1592.049 MHz processor.
[ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3184.09 BogoMIPS (lpj=6368196)
[ 0.004100] pid_max: default: 32768 minimum: 301
[ 0.004187] Security Framework initialized
[ 0.004239] SELinux: Disabled at boot.
[ 0.004567] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.009747] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.011297] Mount-cache hash table entries: 256
[ 0.011632] Initializing cgroup subsys ns
[ 0.011680] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.011735] Initializing cgroup subsys cpuacct
[ 0.011785] Initializing cgroup subsys devices
[ 0.011834] Initializing cgroup subsys freezer
[ 0.011881] Initializing cgroup subsys net_cls
[ 0.011927] Initializing cgroup subsys blkio
[ 0.012073] tseg: 004bf00000
[ 0.012077] mce: CPU supports 5 MCE banks
[ 0.012174] SMP alternatives: switching to UP code
[ 0.018039] Freeing SMP alternatives: 16k freed
[ 0.018108] ACPI: Core revision 20110112
[ 0.023140] Setting APIC routing to flat
[ 0.023547] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.063294] CPU0: AMD Turion(tm) 64 Mobile Technology ML-28 stepping 02
[ 0.064003] Performance Events: AMD PMU driver.
[ 0.064003] ... version: 0
[ 0.064003] ... bit width: 48
[ 0.064003] ... generic registers: 4
[ 0.064003] ... value mask: 0000ffffffffffff
[ 0.064003] ... max period: 00007fffffffffff
[ 0.064003] ... fixed-purpose events: 0
[ 0.064003] ... event mask: 000000000000000f
[ 0.064003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.064003] Brought up 1 CPUs
[ 0.064003] Total of 1 processors activated (3184.09 BogoMIPS).
[ 0.064003] devtmpfs: initialized
[ 0.070665] print_constraints: dummy:
[ 0.070771] NET: Registered protocol family 16
[ 0.070957] node 0 link 0: io port [1000, fffff]
[ 0.070962] TOM: 0000000050000000 aka 1280M
[ 0.071010] node 0 link 0: mmio [a0000, bffff]
[ 0.071014] node 0 link 0: mmio [f0000000, ffffffff]
[ 0.071018] node 0 link 0: mmio [e0000000, efffffff]
[ 0.071023] node 0 link 0: mmio [50000000, dfffffff]
[ 0.071027] bus: [00, ff] on node 0 link 0
[ 0.071031] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.071034] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.071038] bus: 00 index 2 [mem 0x50000000-0xfcffffffff]
[ 0.071056] ACPI: bus type pci registered
[ 0.071215] PCI: MMCONFIG for domain 0000 [bus 00-04] at [mem 0xe0000000-0xe04fffff] (base 0xe0000000)
[ 0.071271] PCI: not using MMCONFIG
[ 0.071317] PCI: Using configuration type 1 for base access
[ 0.072043] bio: create slab <bio-0> at 0
[ 0.072926] ACPI: EC: Look up EC in DSDT
[ 0.075200] ACPI: Interpreter enabled
[ 0.075249] ACPI: (supports S0 S3 S4 S5)
[ 0.075460] ACPI: Using IOAPIC for interrupt routing
[ 0.075594] PCI: MMCONFIG for domain 0000 [bus 00-04] at [mem 0xe0000000-0xe04fffff] (base 0xe0000000)
[ 0.076266] PCI: MMCONFIG at [mem 0xe0000000-0xe04fffff] reserved in ACPI motherboard resources
[ 0.084907] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[ 0.085117] ACPI: No dock devices found.
[ 0.085163] HEST: Table not found.
[ 0.085211] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.086063] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.087669] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.087674] pci_root PNP0A03:00: host bridge window [mem 0x000d4000-0x000d5fff] (ignored)
[ 0.087678] pci_root PNP0A03:00: host bridge window [mem 0x000d6000-0x000d7fff] (ignored)
[ 0.087682] pci_root PNP0A03:00: host bridge window [mem 0x000d8000-0x000d9fff] (ignored)
[ 0.087686] pci_root PNP0A03:00: host bridge window [mem 0x000da000-0x000dbfff] (ignored)
[ 0.087691] pci_root PNP0A03:00: host bridge window [mem 0x50000000-0xffffffff] (ignored)
[ 0.087695] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.087699] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.087713] pci 0000:00:00.0: [1002:5950] type 0 class 0x000600
[ 0.087760] pci 0000:00:01.0: [1002:5a3f] type 1 class 0x000604
[ 0.087838] pci 0000:00:13.0: [1002:4374] type 0 class 0x000c03
[ 0.087864] pci 0000:00:13.0: reg 10: [mem 0xd0000000-0xd0000fff]
[ 0.088124] pci 0000:00:13.1: [1002:4375] type 0 class 0x000c03
[ 0.088151] pci 0000:00:13.1: reg 10: [mem 0xd0001000-0xd0001fff]
[ 0.088278] pci 0000:00:13.2: [1002:4373] type 0 class 0x000c03
[ 0.088307] pci 0000:00:13.2: reg 10: [mem 0xd0002000-0xd0002fff]
[ 0.088412] pci 0000:00:13.2: supports D1 D2
[ 0.088415] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.088422] pci 0000:00:13.2: PME# disabled
[ 0.088463] pci 0000:00:14.0: [1002:4372] type 0 class 0x000c05
[ 0.088486] pci 0000:00:14.0: reg 10: [io 0x8400-0x840f]
[ 0.088500] pci 0000:00:14.0: reg 14: [mem 0xd0003000-0xd00033ff]
[ 0.088564] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.088660] pci 0000:00:14.1: [1002:4376] type 0 class 0x000101
[ 0.088685] pci 0000:00:14.1: reg 10: [io 0x01f0-0x01f7]
[ 0.088700] pci 0000:00:14.1: reg 14: [io 0x03f4-0x03f7]
[ 0.088715] pci 0000:00:14.1: reg 18: [io 0x0170-0x0177]
[ 0.088730] pci 0000:00:14.1: reg 1c: [io 0x0374-0x0377]
[ 0.088744] pci 0000:00:14.1: reg 20: [io 0x8410-0x841f]
[ 0.088821] pci 0000:00:14.3: [1002:4377] type 0 class 0x000601
[ 0.088933] pci 0000:00:14.4: [1002:4371] type 1 class 0x000604
[ 0.089004] pci 0000:00:14.5: [1002:4370] type 0 class 0x000401
[ 0.089030] pci 0000:00:14.5: reg 10: [mem 0xd0003400-0xd00034ff]
[ 0.089152] pci 0000:00:14.6: [1002:4378] type 0 class 0x000703
[ 0.089177] pci 0000:00:14.6: reg 10: [mem 0xd0003800-0xd00038ff]
[ 0.089295] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
[ 0.089323] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
[ 0.089348] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
[ 0.089373] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
[ 0.089403] PCI: peer root bus 00 res updated from pci conf
[ 0.089438] pci 0000:01:05.0: [1002:5955] type 0 class 0x000300
[ 0.089448] pci 0000:01:05.0: reg 10: [mem 0xd4000000-0xd7ffffff pref]
[ 0.089455] pci 0000:01:05.0: reg 14: [io 0x9000-0x90ff]
[ 0.089462] pci 0000:01:05.0: reg 18: [mem 0xd0100000-0xd010ffff]
[ 0.089479] pci 0000:01:05.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.089490] pci 0000:01:05.0: supports D1 D2
[ 0.089509] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.089558] pci 0000:00:01.0: bridge window [io 0x9000-0x9fff]
[ 0.089562] pci 0000:00:01.0: bridge window [mem 0xd0100000-0xd01fffff]
[ 0.089568] pci 0000:00:01.0: bridge window [mem 0xd4000000-0xd7ffffff 64bit pref]
[ 0.089609] pci 0000:05:00.0: [10ec:8139] type 0 class 0x000200
[ 0.089639] pci 0000:05:00.0: reg 10: [io 0xa000-0xa0ff]
[ 0.089657] pci 0000:05:00.0: reg 14: [mem 0xd0208000-0xd02080ff]
[ 0.089762] pci 0000:05:00.0: supports D1 D2
[ 0.089765] pci 0000:05:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.089772] pci 0000:05:00.0: PME# disabled
[ 0.089804] pci 0000:05:02.0: [14e4:4318] type 0 class 0x000280
[ 0.089827] pci 0000:05:02.0: reg 10: [mem 0xd0204000-0xd0205fff]
[ 0.089963] pci 0000:05:09.0: [104c:8031] type 2 class 0x000607
[ 0.089993] pci 0000:05:09.0: reg 10: [mem 0x00000000-0x00000fff]
[ 0.090027] pci 0000:05:09.0: supports D1 D2
[ 0.090030] pci 0000:05:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.090038] pci 0000:05:09.0: PME# disabled
[ 0.090076] pci 0000:05:09.2: [104c:8032] type 0 class 0x000c00
[ 0.090107] pci 0000:05:09.2: reg 10: [mem 0xd0208800-0xd0208fff]
[ 0.090126] pci 0000:05:09.2: reg 14: [mem 0xd0200000-0xd0203fff]
[ 0.090233] pci 0000:05:09.2: supports D1 D2
[ 0.090237] pci 0000:05:09.2: PME# supported from D0 D1 D2 D3hot
[ 0.090244] pci 0000:05:09.2: PME# disabled
[ 0.090277] pci 0000:05:09.3: [104c:8033] type 0 class 0x000180
[ 0.090308] pci 0000:05:09.3: reg 10: [mem 0xd0206000-0xd0207fff]
[ 0.090428] pci 0000:05:09.3: supports D1 D2
[ 0.090431] pci 0000:05:09.3: PME# supported from D0 D1 D2 D3hot
[ 0.090438] pci 0000:05:09.3: PME# disabled
[ 0.090472] pci 0000:05:09.4: [104c:8034] type 0 class 0x000805
[ 0.090502] pci 0000:05:09.4: reg 10: [mem 0xd0209400-0xd02094ff]
[ 0.090519] pci 0000:05:09.4: reg 14: [mem 0xd0209000-0xd02090ff]
[ 0.090537] pci 0000:05:09.4: reg 18: [mem 0xd0208400-0xd02084ff]
[ 0.090629] pci 0000:05:09.4: supports D1 D2
[ 0.090632] pci 0000:05:09.4: PME# supported from D0 D1 D2 D3hot
[ 0.090639] pci 0000:05:09.4: PME# disabled
[ 0.090704] pci 0000:00:14.4: PCI bridge to [bus 05-05] (subtractive decode)
[ 0.090759] pci 0000:00:14.4: bridge window [io 0xa000-0xafff]
[ 0.090766] pci 0000:00:14.4: bridge window [mem 0xd0200000-0xd02fffff]
[ 0.090773] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.090778] pci 0000:00:14.4: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.090782] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.090786] pci 0000:00:14.4: bridge window [mem 0x50000000-0xfcffffffff] (subtractive decode)
[ 0.090853] pci_bus 0000:06: [bus 06-09] partially hidden behind transparent bridge 0000:05 [bus 05-05]
[ 0.090922] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.091027] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.091098] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.091162] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.094197] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
[ 0.094523] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
[ 0.094847] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
[ 0.095171] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
[ 0.095493] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
[ 0.095816] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
[ 0.096146] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
[ 0.096469] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
[ 0.096906] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.096963] vgaarb: loaded
[ 0.097064] PCI: Using ACPI for IRQ routing
[ 0.097110] PCI: pci_cache_line_size set to 64 bytes
[ 0.097217] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.097221] reserve RAM buffer: 000000004bef0000 - 000000004bffffff
[ 0.099398] pnp: PnP ACPI init
[ 0.099490] ACPI: bus type pnp registered
[ 0.100504] pnp 00:00: [bus 00-ff]
[ 0.100508] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.100513] pnp 00:00: [mem 0x000c0000-0x000c1fff window]
[ 0.100523] pnp 00:00: [mem 0x000c2000-0x000c3fff window]
[ 0.100526] pnp 00:00: [mem 0x000c4000-0x000c5fff window]
[ 0.100529] pnp 00:00: [mem 0x000c6000-0x000c7fff window]
[ 0.100533] pnp 00:00: [mem 0x000c8000-0x000c9fff window]
[ 0.100536] pnp 00:00: [mem 0x000ca000-0x000cbfff window]
[ 0.100540] pnp 00:00: [mem 0x000cc000-0x000cdfff window]
[ 0.100543] pnp 00:00: [mem 0x000ce000-0x000cffff window]
[ 0.100546] pnp 00:00: [mem 0x000d0000-0x000d1fff window]
[ 0.100550] pnp 00:00: [mem 0x000d2000-0x000d3fff window]
[ 0.100553] pnp 00:00: [mem 0x000d4000-0x000d5fff window]
[ 0.100557] pnp 00:00: [mem 0x000d6000-0x000d7fff window]
[ 0.100560] pnp 00:00: [mem 0x000d8000-0x000d9fff window]
[ 0.100563] pnp 00:00: [mem 0x000da000-0x000dbfff window]
[ 0.100567] pnp 00:00: [mem 0x000dc000-0x000ddfff window]
[ 0.100570] pnp 00:00: [mem 0x000de000-0x000dffff window]
[ 0.100574] pnp 00:00: [mem 0x000e0000-0x000e1fff window]
[ 0.100577] pnp 00:00: [mem 0x000e2000-0x000e3fff window]
[ 0.100580] pnp 00:00: [mem 0x000e4000-0x000e5fff window]
[ 0.100584] pnp 00:00: [mem 0x000e6000-0x000e7fff window]
[ 0.100587] pnp 00:00: [mem 0x000e8000-0x000e9fff window]
[ 0.100591] pnp 00:00: [mem 0x000ea000-0x000ebfff window]
[ 0.100594] pnp 00:00: [mem 0x000ec000-0x000edfff window]
[ 0.100597] pnp 00:00: [mem 0x000ee000-0x000effff window]
[ 0.100601] pnp 00:00: [mem 0x50000000-0xffffffff window]
[ 0.100604] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.100608] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.100611] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.100701] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.100772] pnp 00:01: [mem 0xe0000000-0xefffffff]
[ 0.100775] pnp 00:01: [mem 0xfec00000-0xfec00fff]
[ 0.100779] pnp 00:01: [mem 0xfee00000-0xfee00fff]
[ 0.100893] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.100942] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.100992] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.101042] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.101312] pnp 00:02: [io 0x0000-0x001f]
[ 0.101315] pnp 00:02: [io 0x0080-0x008f]
[ 0.101318] pnp 00:02: [io 0x00c0-0x00df]
[ 0.101321] pnp 00:02: [dma 4]
[ 0.101373] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.101388] pnp 00:03: [io 0x00f0-0x00fe]
[ 0.101409] pnp 00:03: [irq 13]
[ 0.101458] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.101475] pnp 00:04: [io 0x0070-0x0071]
[ 0.101482] pnp 00:04: [irq 8]
[ 0.101525] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.101538] pnp 00:05: [io 0x0061]
[ 0.101589] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.101606] pnp 00:06: [io 0x0060]
[ 0.101609] pnp 00:06: [io 0x0064]
[ 0.101615] pnp 00:06: [irq 1]
[ 0.101660] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.101683] pnp 00:07: [irq 12]
[ 0.101738] pnp 00:07: Plug and Play ACPI device, IDs SYN011c SYN0100 SYN0002 PNP0f13 (active)
[ 0.101761] pnp 00:08: [io 0x002e-0x002f]
[ 0.101764] pnp 00:08: [io 0x0072-0x0073]
[ 0.101767] pnp 00:08: [io 0x1080]
[ 0.101769] pnp 00:08: [io 0x00b0-0x00b1]
[ 0.101772] pnp 00:08: [io 0x0092]
[ 0.101775] pnp 00:08: [io 0x0220-0x022f]
[ 0.101778] pnp 00:08: [io 0x040b]
[ 0.101781] pnp 00:08: [io 0x04d0-0x04d1]
[ 0.101784] pnp 00:08: [io 0x04d6]
[ 0.101787] pnp 00:08: [io 0x0530-0x0537]
[ 0.101790] pnp 00:08: [io 0x0c00-0x0c01]
[ 0.101792] pnp 00:08: [io 0x0c14]
[ 0.101795] pnp 00:08: [io 0x0c50-0x0c52]
[ 0.101798] pnp 00:08: [io 0x0c6c]
[ 0.101801] pnp 00:08: [io 0x0c6f]
[ 0.101804] pnp 00:08: [io 0x0cd4-0x0cd5]
[ 0.101807] pnp 00:08: [io 0x0cd6-0x0cd7]
[ 0.101810] pnp 00:08: [io 0x0cd8-0x0cdf]
[ 0.101813] pnp 00:08: [io 0x8000-0x805f]
[ 0.101816] pnp 00:08: [io 0x8100-0x81ff window]
[ 0.101819] pnp 00:08: [io 0x8200-0x82ff window]
[ 0.101822] pnp 00:08: [io 0x0f40-0x0f47]
[ 0.101825] pnp 00:08: [io 0x087f]
[ 0.101916] system 00:08: [io 0x1080] has been reserved
[ 0.101965] system 00:08: [io 0x0220-0x022f] has been reserved
[ 0.102013] system 00:08: [io 0x040b] has been reserved
[ 0.102061] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.102110] system 00:08: [io 0x04d6] has been reserved
[ 0.102158] system 00:08: [io 0x0530-0x0537] has been reserved
[ 0.102207] system 00:08: [io 0x0c00-0x0c01] has been reserved
[ 0.102255] system 00:08: [io 0x0c14] has been reserved
[ 0.102303] system 00:08: [io 0x0c50-0x0c52] has been reserved
[ 0.102352] system 00:08: [io 0x0c6c] has been reserved
[ 0.102400] system 00:08: [io 0x0c6f] has been reserved
[ 0.102448] system 00:08: [io 0x0cd4-0x0cd5] has been reserved
[ 0.102497] system 00:08: [io 0x0cd6-0x0cd7] has been reserved
[ 0.102545] system 00:08: [io 0x0cd8-0x0cdf] has been reserved
[ 0.102594] system 00:08: [io 0x8000-0x805f] has been reserved
[ 0.102642] system 00:08: [io 0x8100-0x81ff window] has been reserved
[ 0.102690] system 00:08: [io 0x8200-0x82ff window] has been reserved
[ 0.102739] system 00:08: [io 0x0f40-0x0f47] has been reserved
[ 0.102788] system 00:08: [io 0x087f] has been reserved
[ 0.102836] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.102915] pnp 00:09: [mem 0x000e0000-0x000fffff]
[ 0.102919] pnp 00:09: [mem 0xfff80000-0xffffffff]
[ 0.102922] pnp 00:09: [mem 0x00000000-0x00000fff]
[ 0.102941] pnp 00:09: disabling [mem 0x00000000-0x00000fff] because it overlaps 0000:01:05.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 0.103051] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.103102] system 00:09: [mem 0xfff80000-0xffffffff] has been reserved
[ 0.103151] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.103211] pnp: PnP ACPI: found 10 devices
[ 0.103211] ACPI: ACPI bus type pnp unregistered
[ 0.111746] Switching to clocksource acpi_pm
[ 0.112095] pci 0000:00:14.4: BAR 15: assigned [mem 0x50000000-0x53ffffff pref]
[ 0.112151] pci 0000:01:05.0: BAR 6: assigned [mem 0xd0120000-0xd013ffff pref]
[ 0.112207] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.112256] pci 0000:00:01.0: bridge window [io 0x9000-0x9fff]
[ 0.112305] pci 0000:00:01.0: bridge window [mem 0xd0100000-0xd01fffff]
[ 0.112354] pci 0000:00:01.0: bridge window [mem 0xd4000000-0xd7ffffff 64bit pref]
[ 0.112410] pci 0000:05:09.0: BAR 15: assigned [mem 0x50000000-0x53ffffff pref]
[ 0.112466] pci 0000:05:09.0: BAR 16: assigned [mem 0x54000000-0x57ffffff]
[ 0.112515] pci 0000:05:09.0: BAR 0: assigned [mem 0xd020a000-0xd020afff]
[ 0.112566] pci 0000:05:09.0: BAR 0: set to [mem 0xd020a000-0xd020afff] (PCI address [0xd020a000-0xd020afff])
[ 0.112621] pci 0000:05:09.0: BAR 13: assigned [io 0xa400-0xa4ff]
[ 0.112668] pci 0000:05:09.0: BAR 14: assigned [io 0xa800-0xa8ff]
[ 0.112714] pci 0000:05:09.0: CardBus bridge to [bus 06-09]
[ 0.112759] pci 0000:05:09.0: bridge window [io 0xa400-0xa4ff]
[ 0.112809] pci 0000:05:09.0: bridge window [io 0xa800-0xa8ff]
[ 0.112859] pci 0000:05:09.0: bridge window [mem 0x50000000-0x53ffffff pref]
[ 0.112914] pci 0000:05:09.0: bridge window [mem 0x54000000-0x57ffffff]
[ 0.112964] pci 0000:00:14.4: PCI bridge to [bus 05-05]
[ 0.113011] pci 0000:00:14.4: bridge window [io 0xa000-0xafff]
[ 0.113062] pci 0000:00:14.4: bridge window [mem 0xd0200000-0xd02fffff]
[ 0.113112] pci 0000:00:14.4: bridge window [mem 0x50000000-0x53ffffff pref]
[ 0.113208] pci 0000:05:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.113260] pci 0000:05:09.0: setting latency timer to 64
[ 0.113267] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.113270] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.113274] pci_bus 0000:00: resource 6 [mem 0x50000000-0xfcffffffff]
[ 0.113278] pci_bus 0000:01: resource 0 [io 0x9000-0x9fff]
[ 0.113282] pci_bus 0000:01: resource 1 [mem 0xd0100000-0xd01fffff]
[ 0.113286] pci_bus 0000:01: resource 2 [mem 0xd4000000-0xd7ffffff 64bit pref]
[ 0.113290] pci_bus 0000:05: resource 0 [io 0xa000-0xafff]
[ 0.113293] pci_bus 0000:05: resource 1 [mem 0xd0200000-0xd02fffff]
[ 0.113297] pci_bus 0000:05: resource 2 [mem 0x50000000-0x53ffffff pref]
[ 0.113301] pci_bus 0000:05: resource 4 [io 0x0000-0xffff]
[ 0.113305] pci_bus 0000:05: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.113309] pci_bus 0000:05: resource 6 [mem 0x50000000-0xfcffffffff]
[ 0.113312] pci_bus 0000:06: resource 0 [io 0xa400-0xa4ff]
[ 0.113316] pci_bus 0000:06: resource 1 [io 0xa800-0xa8ff]
[ 0.113320] pci_bus 0000:06: resource 2 [mem 0x50000000-0x53ffffff pref]
[ 0.113323] pci_bus 0000:06: resource 3 [mem 0x54000000-0x57ffffff]
[ 0.113395] NET: Registered protocol family 2
[ 0.113608] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.114443] Switched to NOHz mode on CPU #0
[ 0.115265] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.121189] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.122667] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.122719] TCP reno registered
[ 0.122780] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.122894] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.123162] NET: Registered protocol family 1
[ 0.123226] pci 0000:00:00.0: MSI quirk detected; MSI disabled
[ 0.123281] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
[ 0.776083] pci 0000:01:05.0: Boot video device
[ 0.776113] PCI: CLS 32 bytes, default 64
[ 0.776197] Unpacking initramfs...
[ 1.156753] Freeing initrd memory: 9432k freed
[ 1.170778] audit: initializing netlink socket (disabled)
[ 1.170847] type=2000 audit(1304266640.167:1): initialized
[ 1.184581] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.187602] VFS: Disk quotas dquot_6.5.2
[ 1.187729] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.187913] msgmni has been set to 2376
[ 1.188330] alg: No test for stdrng (krng)
[ 1.188455] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.188512] io scheduler noop registered
[ 1.188556] io scheduler deadline registered
[ 1.188656] io scheduler cfq registered (default)
[ 1.189073] ERST: Table is not found!
[ 1.189246] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.189768] serial 0000:00:14.6: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.189825] serial 0000:00:14.6: PCI INT B disabled
[ 1.190010] Linux agpgart interface v0.103
[ 1.190188] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 1.193216] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.193269] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.193509] mousedev: PS/2 mouse device common for all mice
[ 1.193618] rtc_cmos 00:04: RTC can wake from S4
[ 1.193734] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.193809] rtc0: alarms up to one month, 114 bytes nvram
[ 1.193866] cpuidle: using governor ladder
[ 1.193910] cpuidle: using governor menu
[ 1.194343] TCP cubic registered
[ 1.194574] NET: Registered protocol family 10
[ 1.195603] Mobile IPv6
[ 1.195650] NET: Registered protocol family 17
[ 1.195700] Registering the dns_resolver key type
[ 1.195927] PM: Hibernation image not present or could not be loaded.
[ 1.195944] registered taskstats version 1
[ 1.196512] rtc_cmos 00:04: setting system clock to 2011-05-01 16:17:20 UTC (1304266640)
[ 1.196602] Initalizing network drop monitor service
[ 1.198790] Freeing unused kernel memory: 676k freed
[ 1.199498] Write protecting the kernel read-only data: 6144k
[ 1.205403] Freeing unused kernel memory: 816k freed
[ 1.211961] Freeing unused kernel memory: 776k freed
[ 1.228248] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.248262] <30>udevd[70]: starting version 168
[ 1.488069] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.488121] ACPI: Thermal Zone [THRM] (80 C)
[ 1.535508] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 1.548069] 8139cp 0000:05:00.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 1.587437] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 1.604471] firewire_ohci 0000:05:09.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 1.620449] sdhci: Secure Digital Host Controller Interface driver
[ 1.620503] sdhci: Copyright(c) Pierre Ossman
[ 1.632721] usbcore: registered new interface driver usbfs
[ 1.632953] usbcore: registered new interface driver hub
[ 1.636824] usbcore: registered new device driver usb
[ 1.640790] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.641890] SCSI subsystem initialized
[ 1.644164] ehci_hcd 0000:00:13.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.644252] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 1.644364] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
[ 1.644523] ehci_hcd 0000:00:13.2: irq 19, io mem 0xd0002000
[ 1.656730] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.656829] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.656879] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.656933] usb usb1: Product: EHCI Host Controller
[ 1.656979] usb usb1: Manufacturer: Linux 2.6.38-2-amd64 ehci_hcd
[ 1.657027] usb usb1: SerialNumber: 0000:00:13.2
[ 1.657437] hub 1-0:1.0: USB hub found
[ 1.657489] hub 1-0:1.0: 8 ports detected
[ 1.678599] firewire_ohci: Added fw-ohci device 0000:05:09.2, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[ 1.681746] 8139too 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.683052] libata version 3.00 loaded.
[ 1.686665] 8139too 0000:05:00.0: eth0: RealTek RTL8139 at 0xffffc9000031a000, 00:c0:9f:b2:ff:35, IRQ 18
[ 1.688793] sdhci-pci 0000:05:09.4: SDHCI controller found [104c:8034] (rev 0)
[ 1.688874] sdhci-pci 0000:05:09.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.689005] mmc0: no vmmc regulator found
[ 1.692204] Registered led device: mmc0::
[ 1.692421] mmc0: SDHCI controller on PCI [0000:05:09.4] using PIO
[ 1.692529] mmc1: no vmmc regulator found
[ 1.692643] Registered led device: mmc1::
[ 1.692731] mmc1: SDHCI controller on PCI [0000:05:09.4] using PIO
[ 1.692799] mmc2: no vmmc regulator found
[ 1.692904] Registered led device: mmc2::
[ 1.692975] mmc2: SDHCI controller on PCI [0000:05:09.4] using PIO
[ 1.695006] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.695129] pata_atiixp 0000:00:14.1: setting latency timer to 64
[ 1.695552] b43-pci-bridge 0000:05:02.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.696916] scsi0 : pata_atiixp
[ 1.697177] scsi1 : pata_atiixp
[ 1.698195] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8410 irq 14
[ 1.698245] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8418 irq 15
[ 1.712069] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x0D, vendor 0x4243)
[ 1.712081] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x09, vendor 0x4243)
[ 1.712092] ssb: Core 2 found: PCI (cc 0x804, rev 0x0C, vendor 0x4243)
[ 1.712103] ssb: Core 3 found: PCMCIA (cc 0x80D, rev 0x07, vendor 0x4243)
[ 1.744111] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.744259] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.744335] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.744397] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 1.744481] ohci_hcd 0000:00:13.0: irq 19, io mem 0xd0000000
[ 1.752125] ssb: Sonics Silicon Backplane found on PCI device 0000:05:02.0
[ 1.809085] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.809136] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.809188] usb usb2: Product: OHCI Host Controller
[ 1.809235] usb usb2: Manufacturer: Linux 2.6.38-2-amd64 ohci_hcd
[ 1.809282] usb usb2: SerialNumber: 0000:00:13.0
[ 1.811650] hub 2-0:1.0: USB hub found
[ 1.811706] hub 2-0:1.0: 4 ports detected
[ 1.811963] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.812067] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 1.812127] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[ 1.812209] ohci_hcd 0000:00:13.1: irq 19, io mem 0xd0001000
[ 1.872058] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.872108] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.872161] usb usb3: Product: OHCI Host Controller
[ 1.872207] usb usb3: Manufacturer: Linux 2.6.38-2-amd64 ohci_hcd
[ 1.872255] usb usb3: SerialNumber: 0000:00:13.1
[ 1.872565] hub 3-0:1.0: USB hub found
[ 1.872618] hub 3-0:1.0: 4 ports detected
[ 1.877540] ata2.00: ATAPI: PIONEER DVDRW DVR-K15, 1.11, max MWDMA2
[ 1.878720] ata1.00: ATA-6: FUJITSU MHT2080AT PL, 0022, max UDMA/100
[ 1.878768] ata1.00: 156301488 sectors, multi 16: LBA
[ 1.905226] ata2.00: configured for MWDMA2
[ 1.905586] ata1.00: configured for UDMA/100
[ 1.905792] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHT2080A 0022 PQ: 0 ANSI: 5
[ 1.921073] scsi 1:0:0:0: CD-ROM PIONEER DVDRW DVR-K15 1.11 PQ: 0 ANSI: 5
[ 1.971909] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 1.972138] sd 0:0:0:0: [sda] Write Protect is off
[ 1.972185] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.972213] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.984550] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 1.984606] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.985142] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.029753] sda: sda1 sda2
[ 2.030203] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.048888] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.049468] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.176415] firewire_core: created device fw0: GUID 00c09f00006055f9, S400
[ 2.184038] Refined TSC clocksource calibration: 1591.844 MHz.
[ 2.184093] Switching to clocksource tsc
[ 2.451068] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 5.521610] <30>udevd[273]: starting version 168
[ 6.409965] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 6.410031] ACPI: Power Button [PWRB]
[ 6.410172] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 6.410228] ACPI: Sleep Button [SLPB]
[ 6.410359] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[ 6.415812] ACPI: Lid Switch [LID]
[ 6.416044] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 6.416104] ACPI: Power Button [PWRF]
[ 6.724597] ACPI: acpi_idle registered with cpuidle
[ 6.724668] Marking TSC unstable due to TSC halts in idle
[ 6.726807] Switching to clocksource acpi_pm
[ 6.817107] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:0e/LNXVIDEO:00/input/input5
[ 6.817177] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 6.908174] ACPI: AC Adapter [ACAD] (on-line)
[ 6.971922] ACPI: Battery Slot [BAT1] (battery present)
[ 7.089991] wmi: Mapper loaded
[ 7.280552] MCE: In-kernel MCE decoding enabled.
[ 7.621725] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 7.700531] Synaptics Touchpad, model: 1, fw: 5.10, id: 0x258eb1, caps: 0xa04713/0x0/0x0
[ 7.734398] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[ 7.813918] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8400, revision 0
[ 9.434924] yenta_cardbus 0000:05:09.0: CardBus bridge found [103c:3091]
[ 9.435002] yenta_cardbus 0000:05:09.0: Enabling burst memory read transactions
[ 9.435060] yenta_cardbus 0000:05:09.0: Using CSCINT to route CSC interrupts to PCI
[ 9.435114] yenta_cardbus 0000:05:09.0: Routing CardBus interrupts to PCI
[ 9.435166] yenta_cardbus 0000:05:09.0: TI: mfunc 0x01a01b22, devctl 0x64
[ 9.435585] EDAC MC: Ver: 2.1.0 Apr 23 2011
[ 9.468229] EDAC amd64_edac: v3.3.0
[ 9.470498] EDAC amd64: DRAM ECC disabled.
[ 9.470556] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 9.470559] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 9.470561] (Note that use of the override may cause unknown side effects.)
[ 9.503866] cfg80211: Calling CRDA to update world regulatory domain
[ 9.511666] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 9.521217] input: HP WMI hotkeys as /devices/virtual/input/input8
[ 9.704092] yenta_cardbus 0000:05:09.0: ISA IRQ mask 0x0ce8, PCI irq 17
[ 9.704156] yenta_cardbus 0000:05:09.0: Socket status: 30000006
[ 9.704206] pci_bus 0000:05: Raising subordinate bus# of parent bus (#05) from #05 to #09
[ 9.704271] yenta_cardbus 0000:05:09.0: pcmcia: parent PCI bridge window: [io 0xa000-0xafff]
[ 9.704327] yenta_cardbus 0000:05:09.0: pcmcia: parent PCI bridge window: [mem 0xd0200000-0xd02fffff]
[ 9.704383] pcmcia_socket pcmcia_socket0: cs: memory probe 0xd0200000-0xd02fffff: excluding 0xd0200000-0xd020ffff
[ 9.704565] yenta_cardbus 0000:05:09.0: pcmcia: parent PCI bridge window: [mem 0x50000000-0x53ffffff pref]
[ 9.704620] pcmcia_socket pcmcia_socket0: cs: memory probe 0x50000000-0x53ffffff: excluding 0x50000000-0x53ffffff
[ 9.709671] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 9.719653] tifm_7xx1 0000:05:09.3: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 13.102611] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xfffff
[ 13.102842] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
[ 13.102992] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: clean.
[ 13.516549] [drm] Initialized drm 1.1.0 20060810
[ 17.247178] b43-phy0: Broadcom 4318 WLAN found (core revision 9)
[ 17.646854] [drm] radeon kernel modesetting enabled.
[ 17.647123] radeon 0000:01:05.0: power state changed by ACPI to D0
[ 17.647173] radeon 0000:01:05.0: power state changed by ACPI to D0
[ 17.647228] radeon 0000:01:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 17.655412] [drm] initializing kernel modesetting (RS480 0x1002:0x5955).
[ 17.655501] [drm] register mmio base: 0xD0100000
[ 17.655546] [drm] register mmio size: 65536
[ 17.655847] [drm] Generation 2 PCI interface, using max accessible memory
[ 17.655900] radeon 0000:01:05.0: VRAM: 64M 0x000000004C000000 - 0x000000004FFFFFFF (64M used)
[ 17.655955] radeon 0000:01:05.0: GTT: 512M 0x0000000060000000 - 0x000000007FFFFFFF
[ 17.656086] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 17.656135] [drm] Driver supports precise vblank timestamp query.
[ 17.656196] [drm] radeon: irq initialized.
[ 17.656433] [drm] Detected VRAM RAM=64M, BAR=64M
[ 17.656486] [drm] RAM width 128bits DDR
[ 17.656656] [TTM] Zone kernel: Available graphics memory: 609410 kiB.
[ 17.656703] [TTM] Initializing pool allocator.
[ 17.656777] [drm] radeon: 64M of VRAM memory ready
[ 17.656823] [drm] radeon: 512M of GTT memory ready.
[ 17.656897] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 17.664712] [drm] radeon: 4 quad pipes, 1 z pipes initialized.
[ 17.671043] radeon 0000:01:05.0: WB enabled
[ 17.671887] [drm] Loading R300 Microcode
[ 19.709500] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 19.710517] Registered led device: b43-phy0::radio
[ 19.710540] Broadcom 43xx driver loaded [ Features: PMNLS, Firmware-ID: FW13 ]
[ 20.422857] [drm] radeon: ring at 0x0000000060001000
[ 20.422926] [drm] ring test succeeded in 1 usecs
[ 20.423127] [drm] radeon: ib pool ready.
[ 20.423263] [drm] ib test succeeded in 0 usecs
[ 20.423631] [drm] Panel ID String: SEC
[ 20.423678] [drm] Panel Size 1280x768
[ 20.423861] [drm] Radeon Display Connectors
[ 20.423906] [drm] Connector 0:
[ 20.423950] [drm] VGA
[ 20.423996] [drm] DDC: 0x68 0x68 0x68 0x68 0x68 0x68 0x68 0x68
[ 20.424108] [drm] Encoders:
[ 20.424152] [drm] CRT1: INTERNAL_DAC2
[ 20.424198] [drm] Connector 1:
[ 20.424243] [drm] LVDS
[ 20.424289] [drm] DDC: 0x198 0x198 0x19c 0x19c 0x1a0 0x1a0 0x1a4 0x1a4
[ 20.424336] [drm] Encoders:
[ 20.424380] [drm] LCD1: INTERNAL_LVDS
[ 20.424426] [drm] Connector 2:
[ 20.424471] [drm] S-video
[ 20.424516] [drm] Encoders:
[ 20.424560] [drm] TV1: INTERNAL_DAC2
[ 20.481452] [drm] radeon: power management initialized
[ 20.614715] [drm] fb mappable at 0xD4040000
[ 20.614766] [drm] vram apper at 0xD4000000
[ 20.614810] [drm] size 3932160
[ 20.614854] [drm] fb depth is 24
[ 20.614897] [drm] pitch is 5120
[ 20.654966] Console: switching to colour frame buffer device 160x48
[ 20.667197] fb0: radeondrmfb frame buffer device
[ 20.667249] drm: registered panic notifier
[ 20.667460] ATI IXP AC97 controller 0000:00:14.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 20.672065] [drm] Initialized radeon 2.8.0 20080528 for 0000:01:05.0 on minor 0
[ 20.782055] ATI IXP MC97 controller 0000:00:14.6: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 20.911665] MC'97 0 converters and GPIO not ready (0x1)
[ 23.650702] Adding 522108k swap on /dev/sda2. Priority:-1 extents:1 across:522108k
[ 23.667114] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 23.981542] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 24.237213] Uniform Multi-Platform E-IDE driver
[ 24.316792] ide-cd driver 5.00
[ 24.328146] ide-gd driver 1.18
[ 24.336899] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
[ 24.421625] powernow-k8: Found 1 AMD Turion(tm) 64 Mobile Technology ML-28 (1 cpu cores) (version 2.20.00)
[ 24.424132] powernow-k8: 0 : fid 0x8 (1600 MHz), vid 0x4
[ 24.426508] powernow-k8: 1 : fid 0x0 (800 MHz), vid 0x16
[ 24.520440] fuse init (API version 7.16)
More information about the vox-tech
mailing list