[vox-tech] GnomeBake resultfor CD and DVD burning Question

[Chris Horsting]

Alex Mandel wrote:
> Chris Horsting wrote:
>> Hi,
>> Thanks for everyones advice on how to solve my k3b problem. However, 
>> it did not work. I guess I try the 1.0 version. So, What are the 
>> options for GUI CD burning for Fedora Core 4.0. Currently, I am using 
>> Xcdroast. That some times works. What about Nautilus?
>> Thanks
>> Chris
>
> I've used Nautilus for burning, but only from ISO files. Not sure how 
> well it works when you're trying to compile random files from across 
> the drive.
> I also saw Gnomebaker the other day but haven't tried that out since 
> k3b works for me.
>
> Alex
> _______________________________________________
> vox-tech mailing list
> vox-tech at lists.lugod.org
> http://lists.lugod.org/mailman/listinfo/vox-tech
>
Hi,
I ran Gnomebaker and was unable to make copy.
Here is the result of the run:
>
> cdrecord: No write mode specified.
> cdrecord: Asuming -tao mode.
> cdrecord: Future versions of cdrecord may have different drive 
> dependent defaults.
> cdrecord: Continuing in 5 seconds...
> cdrecord: Cannot allocate memory. WARNING: Cannot do mlockall(2).
> cdrecord: WARNING: This causes a high risk for buffer underruns.
> cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
> cdrecord: Permission denied. WARNING: Cannot set priority using 
> setpriority().
> cdrecord: WARNING: This causes a high risk for buffer underruns.
> scsidev: '/dev/hdc'
> devname: '/dev/hdc'
> scsibus: -2 target: -2 lun: -2
> Linux sg driver version: 3.5.27
> cdrecord: Warning: using inofficial libscg transport code version 
> (schily - Red Hat-scsi-linux-sg.c-1.83-RH '@(#)scsi-linux-sg.c 1.83 
> 04/05/20 Copyright 1997 J. Schilling').
> SCSI buffer size: 64512
> Cdrecord-Clone 2.01-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 
> Jörg Schilling
> Note: This version is an unofficial (modified) version with DVD support
> Note: and therefore may have bugs that are not present in the original.
> Note: Please send bug reports or support requests to 
> http://bugzilla.redhat.com/bugzilla
> Note: The author of cdrecord should not be bothered with problems in 
> this version.
> TOC Type: 3 = CD-ROM XA mode 2
> Using libscg version 'schily-0.8'.
> atapi: 1
> Device type : Removable CD-ROM
> Version : 0
> Response Format: 2
> Capabilities :
> Vendor_info : 'SONY '
> Identifikation : 'CD-RW CRX230ED '
> Revision : '4YS1'
> Device seems to be: Generic mmc CD-RW.
> Current: 0x0009
> Profile: 0x000A
> Profile: 0x0009 (current)
> Profile: 0x0008
> Profile: 0x0002
> Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
> Driver flags : MMC-3 SWABAUDIO BURNFREE FORCESPEED
> Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P 
> RAW/R96R
> Drive buf size : 1419264 = 1386 KB
> FIFO size : 4194304 = 4096 KB
> cdrecord: Drive needs to reload the media to return to proper status.
> cdrecord: Cannot get next writable address for 'invisible' track.
> cdrecord: This means that we are checking recorded media.
> cdrecord: This media cannot be written in streaming mode anymore.
> cdrecord: If you like to write to 'preformatted' RW media, try to 
> blank the media first.
> cdrecord: WARNING: Data may not fit on standard 74min disk.
> cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
> cdrecord: Permission denied. WARNING: Cannot set priority using 
> setpriority().
> cdrecord: WARNING: This causes a high risk for buffer underruns.
>  4 seconds. 3 seconds. 2 seconds. 
> 1 seconds. 0 seconds. Operation starts.
> Waiting for reader process to fill input buffer ... input buffer ready.
> BURN-Free is OFF.
> Performing OPC...
> cdrecord: Success. read track info: scsi sendcmd: no error
> CDB: 52 01 00 00 00 FF 00 00 1C 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 30 06 00 00
> Sense Key: 0x5 Illegal Request, Segment 0
> Sense Code: 0x30 Qual 0x06 (cannot format medium - incompatible 
> medium) Fru 0x0
> Sense flags: Blk 0 (not valid)
> resid: 28
> cmd finished after 0.000s timeout 240s
> cdrecord: Cannot get next writable address for 'invisible' track.
> cdrecord: This means that we are checking recorded media.
> cdrecord: This media cannot be written in streaming mode anymore.
> cdrecord: If you like to write to 'preformatted' RW media, try to 
> blank the media first.
> cdrecord: Cannot get next writable address.
> Writing time: 0.060s
> Average write speed 999.0x.
> Fixating...
> Fixating time: 0.008s
> cdrecord: fifo had 64 puts and 0 gets.
> cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
>
>
> Second Run: I added Daemon, and disk right to user and got these result:
> cdrecord: No write mode specified.
> cdrecord: Asuming -tao mode.
> cdrecord: Future versions of cdrecord may have different drive 
> dependent defaults.
> cdrecord: Continuing in 5 seconds...
> cdrecord: Cannot allocate memory. WARNING: Cannot do mlockall(2).
> cdrecord: WARNING: This causes a high risk for buffer underruns.
> cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
> cdrecord: Permission denied. WARNING: Cannot set priority using 
> setpriority().
> cdrecord: WARNING: This causes a high risk for buffer underruns.
> scsidev: '/dev/hdc'
> devname: '/dev/hdc'
> scsibus: -2 target: -2 lun: -2
> Error trying to open /dev/hdc exclusively ... retrying in 1 second.
> Error trying to open /dev/hdc exclusively ... retrying in 1 second.
> Error trying to open /dev/hdc exclusively ... retrying in 1 second.
> Error trying to open /dev/hdc exclusively ... retrying in 1 second.
> Error trying to open /dev/hdc exclusively ... retrying in 1 second.
> Error trying to open /dev/hdc exclusively ... retrying in 1 second.
> Error trying to open /dev/hdc exclusively ... retrying in 1 second.
> Error trying to open /dev/hdc exclusively ... retrying in 1 second.
> Error trying to open /dev/hdc exclusively ... retrying in 1 second.
> Error trying to open /dev/hdc exclusively ... retrying in 1 second.
> Cdrecord-Clone 2.01-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 
> Jörg Schilling
> Note: This version is an unofficial (modified) version with DVD support
> Note: and therefore may have bugs that are not present in the original.
> Note: Please send bug reports or support requests to 
> http://bugzilla.redhat.com/bugzilla
> Note: The author of cdrecord should not be bothered with problems in 
> this version.
> TOC Type: 3 = CD-ROM XA mode 2
> cdrecord: Device or resource busy. Cannot open '/dev/hdc'. Cannot open 
> SCSI driver.
> cdrecord: For possible targets try 'cdrecord -scanbus'. Make sure you 
> are root.
> cdrecord: For possible transport specifiers try 'cdrecord dev=help'.
>
Is there any possibility that the problem might be with the CD-Rom 
itself? I have a Sonny CD-RW CRX230ED