[vox-tech] eth0 troubles
Karalius, Joseph
Joseph.Karalius at seminis.com
Thu Aug 12 11:36:47 PDT 2004
> -----Original Message-----
> From: vox-tech-bounces at lists.lugod.org
> [mailto:vox-tech-bounces at lists.lugod.org]On Behalf Of p at dirac.org
> Sent: Wednesday, August 11, 2004 4:41 PM
> To: lugod's technical discussion forum
> Subject: Re: [vox-tech] eth0 troubles
>
please post the following
> commands:
>
> ifconfig
>
> lsmod
>
mmagseq:~# ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:0D:56:93:83:34
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:18 Base address:0xdf40 Memory:feae0000-feb00000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:6552 errors:0 dropped:0 overruns:0 frame:0
TX packets:6552 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:368680 (360.0 KiB) TX bytes:368680 (360.0 KiB)
###################################################
mmagseq:~# lsmod
Module Size Used by Not tainted
soundcore 3268 0 (autoclean)
nls_iso8859-1 2780 0 (autoclean)
i830 54524 15
agpgart 39524 11 (autoclean)
apm 8492 1 (autoclean)
pcmcia_core 38784 0
binfmt_misc 5220 1
mousedev 3732 1
keybdev 1860 0 (unused)
hid 18820 0 (unused)
input 3040 0 [mousedev keybdev hid]
af_packet 11624 1 (autoclean)
uhci 21628 0 (unused)
ehci-hcd 14988 0 (unused)
usbcore 53068 1 [hid uhci ehci-hcd]
isofs 23092 0 (autoclean)
e1000 57988 1
ide-cd 27968 0
cdrom 25088 0 [ide-cd]
rtc 6344 0 (autoclean)
ext3 66696 7 (autoclean)
jbd 35076 7 (autoclean) [ext3]
ide-detect 288 0 (autoclean) (unused)
piix 7528 2 (autoclean)
ide-disk 12512 8 (autoclean)
ide-core 94300 8 (autoclean) [ide-cd ide-detect piix
ide-disk]
unix 13260 129 (autoclean)
#####################################
mmagseq:~# modprobe -a e1000
######################################
mmagseq:~# dmesg
Linux version 2.4.25-1-386 (herbert at gondolin) (gcc version 3.3.2 (Debian))
#1 Tue Feb 24 08:11:13 EST 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007f770000 (usable)
BIOS-e820: 000000007f770000 - 000000007f772000 (ACPI NVS)
BIOS-e820: 000000007f772000 - 000000007f793000 (ACPI data)
BIOS-e820: 000000007f793000 - 000000007f800000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fecf0000 - 00000000fecf1000 (reserved)
BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
Warning only 896MB will be used.
Use a HIGHMEM enabled kernel.
896MB LOWMEM available.
ACPI: have wakeup address 0xc0001000
found SMP MP-table at 000fe710
hm, page 000fe000 reserved twice.
hm, page 000ff000 reserved twice.
hm, page 000f0000 reserved twice.
On node 0 totalpages: 229376
zone(0): 4096 pages.
zone(1): 225280 pages.
zone(2): 0 pages.
ACPI: RSDP (v000 DELL ) @ 0x000feba0
ACPI: RSDT (v001 DELL GX270 0x00000007 ASL 0x00000061) @ 0x000fd192
ACPI: FADT (v001 DELL GX270 0x00000007 ASL 0x00000061) @ 0x000fd1ca
ACPI: SSDT (v001 DELL st_ex 0x00001000 MSFT 0x0100000d) @ 0xfffd502b
ACPI: MADT (v001 DELL GX270 0x00000007 ASL 0x00000061) @ 0x000fd23e
ACPI: BOOT (v001 DELL GX270 0x00000007 ASL 0x00000061) @ 0x000fd2aa
ACPI: ASF! (v016 DELL GX270 0x00000007 ASL 0x00000061) @ 0x000fd2d2
ACPI: DSDT (v001 DELL dt_ex 0x00001000 MSFT 0x0100000d) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 Pentium 4(tm) XEON(tm) APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
Using ACPI for processor (LAPIC) configuration information
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: DELL Product ID: Opti GX270 APIC at: 0xFEE00000
I/O APIC #1 Version 32 at 0xFEC00000.
Enabling APIC mode: Flat. Using 1 I/O APICs
Processors: 1
Kernel command line: root=/dev/hda2 ro
Initializing CPU#0
Detected 2793.247 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 5570.56 BogoMIPS
Memory: 901756k/917504k available (1079k kernel code, 15364k reserved, 465k
data, 92k init, 0k highmem)
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 65536 (order: 6, 262144 bytes)
Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
CPU: Common caps: bfebfbff 00000000 00000000 00000000
CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
ENABLING IO-APIC IRQs
Setting 1 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 1 ... ok.
init IO_APIC IRQs
IO-APIC (apicid-pin) 1-0, 1-13, 1-20, 1-21, 1-22 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 41.
number of IO-APIC #1 registers: 24.
testing the IO APIC.......................
IO APIC #1......
.... register #00: 01000000
....... : physical APIC id: 01
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 00178020
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0020
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 001 01 0 0 0 0 0 1 1 39
02 001 01 0 0 0 0 0 1 1 31
03 001 01 0 0 0 0 0 1 1 41
04 001 01 0 0 0 0 0 1 1 49
05 001 01 0 0 0 0 0 1 1 51
06 001 01 0 0 0 0 0 1 1 59
07 001 01 0 0 0 0 0 1 1 61
08 001 01 0 0 0 0 0 1 1 69
09 001 01 0 0 0 0 0 1 1 71
0a 001 01 0 0 0 0 0 1 1 79
0b 001 01 0 0 0 0 0 1 1 81
0c 001 01 0 0 0 0 0 1 1 89
0d 000 00 1 0 0 0 0 0 0 00
0e 001 01 0 0 0 0 0 1 1 91
0f 001 01 0 0 0 0 0 1 1 99
10 001 01 1 1 0 1 0 1 1 A1
11 001 01 1 1 0 1 0 1 1 A9
12 001 01 1 1 0 1 0 1 1 B1
13 001 01 1 1 0 1 0 1 1 B9
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 001 01 1 1 0 1 0 1 1 C1
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ18 -> 0:18
IRQ19 -> 0:19
IRQ23 -> 0:23
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 2793.2723 MHz.
..... host bus clock speed is 199.5193 MHz.
cpu: 0, clocks: 1995193, slice: 997596
CPU0<T0:1995184,T1:997584,D:4,S:997596,C:1995193>
ACPI: Subsystem revision 20040116
ACPI: Interpreter disabled.
PCI: PCI BIOS revision 2.10 entry at 0xfbab0, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: ACPI tables contain no PCI IRQ routing entries
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 00:1f.1
Transparent bridge - Intel Corp. 82801BA/CA/DB/EB PCI Bridge
PCI: Using IRQ router PIIX/ICH [8086/24d0] at 00:1f.0
PCI->APIC IRQ transform: (B0,I2,P0) -> 16
PCI->APIC IRQ transform: (B0,I29,P0) -> 16
PCI->APIC IRQ transform: (B0,I29,P1) -> 19
PCI->APIC IRQ transform: (B0,I29,P2) -> 18
PCI->APIC IRQ transform: (B0,I29,P0) -> 16
PCI->APIC IRQ transform: (B0,I29,P3) -> 23
PCI->APIC IRQ transform: (B0,I31,P0) -> 18
PCI->APIC IRQ transform: (B0,I31,P0) -> 18
PCI->APIC IRQ transform: (B0,I31,P1) -> 17
PCI->APIC IRQ transform: (B1,I12,P0) -> 18
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
devfs: v1.12c (20020818) Richard Gooch (rgooch at atnf.csiro.au)
devfs: boot_options: 0x0
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT
SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
COMX: driver version 0.85 (C) 1995-1999 ITConsult-Pro Co. <info at itc.hu>
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 3540 blocks [1 disk] into ram disk... done.
Freeing initrd memory: 3540k freed
VFS: Mounted root (cramfs filesystem).
Freeing unused kernel memory: 92k freed
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide: late registration of driver.
ICH5: IDE controller at PCI slot 00:1f.1
ICH5: chipset revision 2
ICH5: not 100% native mode: will probe irqs later
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
ICH5-SATA: IDE controller at PCI slot 00:1f.2
ICH5-SATA: chipset revision 2
ICH5-SATA: 100% native mode on irq 18
ide0: BM-DMA at 0xfea0-0xfea7, BIOS settings: hda:DMA, hdb:pio
ide2: BM-DMA at 0xfea8-0xfeaf, BIOS settings: hde:DMA, hdf:pio
hda: WDC WD1200JD-75GBB0, ATA DISK drive
hdb: probing with STATUS(0x00) instead of ALTSTATUS(0x50)
hdb: probing with STATUS(0x00) instead of ALTSTATUS(0x50)
blk: queue f8826520, I/O limit 4095Mb (mask 0xffffffff)
hdc: _NEC DVD+RW ND-2100AD, ATAPI CD/DVD-ROM drive
hde: WDC WD1200JD-75GBB0, ATA DISK drive
hdf: probing with STATUS(0x00) instead of ALTSTATUS(0x50)
hdf: probing with STATUS(0x00) instead of ALTSTATUS(0x50)
blk: queue f8826dc8, I/O limit 4095Mb (mask 0xffffffff)
ide0 at 0xfe00-0xfe07,0xfe12 on irq 18
ide1 at 0x170-0x177,0x376 on irq 15
ide2 at 0xfe20-0xfe27,0xfe32 on irq 18
hda: attached ide-disk driver.
hda: 234375000 sectors (120000 MB) w/8192KiB Cache, CHS=14589/255/63,
UDMA(100)
hde: attached ide-disk driver.
hde: 234375000 sectors (120000 MB) w/8192KiB Cache, CHS=14589/255/63,
UDMA(100)
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 >
/dev/ide/host0/bus1/target0/lun0:
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Adding Swap: 3903744k swap-space (priority -1)
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal
Real Time Clock Driver v1.10f
hdc: attached ide-cdrom driver.
hdc: ATAPI 40X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
Intel(R) PRO/1000 Network Driver - version 5.2.20-k1
Copyright (c) 1999-2003 Intel Corporation.
eth0: Intel(R) PRO/1000 Network Connection
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,3), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,5), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,6), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,7), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,9), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
cdrom: open failed.
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
PCI: Setting latency timer of device 00:1d.7 to 64
ehci_hcd 00:1d.7: Intel Corp. 82801EB USB2
ehci_hcd 00:1d.7: irq 23, pci mem f8878800
usb.c: new USB bus registered, assigned bus number 1
ehci_hcd 00:1d.7: enabled 64bit PCI DMA
PCI: cache line size of 128 is not supported by device 00:1d.7
ehci_hcd 00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
hub.c: USB hub found
hub.c: 8 ports detected
uhci.c: USB Universal Host Controller Interface driver v1.1
PCI: Setting latency timer of device 00:1d.0 to 64
uhci.c: USB UHCI at I/O 0xff80, IRQ 16
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Setting latency timer of device 00:1d.1 to 64
uhci.c: USB UHCI at I/O 0xff60, IRQ 19
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Setting latency timer of device 00:1d.2 to 64
uhci.c: USB UHCI at I/O 0xff40, IRQ 18
usb.c: new USB bus registered, assigned bus number 4
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Setting latency timer of device 00:1d.3 to 64
uhci.c: USB UHCI at I/O 0xff20, IRQ 16
usb.c: new USB bus registered, assigned bus number 5
hub.c: USB hub found
hub.c: 2 ports detected
hub.c: new USB device 00:1d.1-2, assigned address 2
hub.c: USB hub found
hub.c: 3 ports detected
hub.c: new USB device 00:1d.1-2.1, assigned address 3
usb.c: USB device 3 (vend/prod 0x413c/0x2002) is not claimed by any active
driver.
hub.c: new USB device 00:1d.1-2.2, assigned address 4
usb.c: USB device 4 (vend/prod 0x46d/0xc016) is not claimed by any active
driver.
usb.c: registered new driver hiddev
usb.c: registered new driver hid
mice: PS/2 mouse device common for all mice
usb_control/bulk_msg: timeout
input: USB HID v1.10 Keyboard [Dell Dell USB Keyboard Hub] on usb3:3.0
input: USB HID v1.10 Device [Dell Dell USB Keyboard Hub] on usb3:3.1
input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb3:4.0
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech at suse.cz>
hid-core.c: USB HID support drivers
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Intel ISA PCIC probe: not found.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Intel ISA PCIC probe: not found.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 816M
agpgart: Detected an Intel(R) 865G Chipset.
agpgart: Detected 8060K stolen memory.
agpgart: AGP aperture is 128M @ 0xe8000000
[drm] AGP 0.99 Aperture @ 0xe8000000 128MB
[drm] Initialized i830 1.3.2 20021108 on minor 0
keyboard: Timeout - AT keyboard not present?(00)
keyboard: Timeout - AT keyboard not present?(20)
cdrom: open failed.
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
#####################################################
mmagseq:~# zgrep -i e1000 /proc/config.gz
gzip: /proc/config.gz: No such file or directory
mmagseq:~#
More information about the vox-tech
mailing list