[vox-tech] Wireless card seems to "freeze" my wireless network

[Ryan Castellucci]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

On Monday 26 May 2003 06:03 pm, Ryan Castellucci wrote:
> It should have a failsafe ROM on it that will allow you to repair it ev=
en
> after a bad flash. unplug it, hold down the power button, and plug it b=
ack
> in, wait 10 seconds are release the power button.
>
> You should then be able to visit http://192.168.1.251 over ethernet and
> reflash it. If not, you can call linksys, they will give you an RMA eve=
n if
> you botched a flash.

Bah, never mind. I guess you already did. Check out=20
http://www.seattlewireless.net/index.cgi/Wap11Ver22Hack I've found that t=
his=20
firmware works a lot better, especialy if you're using advanced features =
like=20
AP Client mode, or repeating.

- --
PGP/GPG Fingerprint: 3B30 C6BE B1C6 9526 7A90  34E7 11DF 44F3 7217 7BC7
On pgp.mit.edu, import with `gpg --keyserver pgp.mit.edu --recv-key 72177=
BC7`
Also available at http://www.cal.net/~ryan/ryan_at_mother_dot_com.asc

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.6 (GNU/Linux)
Comment: For info see http://www.gnupg.org

iD8DBQE+0uEaEd9E83IXe8cRAgmEAJ44bHyjRKS0UU/G6ndGBvdQLHGEvACguC//
r6OpXCY+a4QvA9hcYFxrU3U=3D
=3DcySo
-----END PGP SIGNATURE-----